[OverRev]

Hi, fellows. I installed JB4 on my 2015 M235i today. Everything is pretty straight forward for the install after a little research online. However, i couldn't find any written menu/instruction for the JB4 steering CANBUS control. I searched BMS web site and all i found is a video posted from N54Tech forum but i have a 2015 M235i with N55 and my JB4 has the most updated firmware ( because it's new from BMS). I am not sure if the option menu is identical to the demo video and i don't wanna "TRY". I tried BMS web support and there in nothing to download or look at. does anyone here know where i can find a written menu for the JB4 option menu?

[Realdread1]

I dont think latestest fireware supports can us. You may need to spring for the obd2

[wntrsnowg]

I've seen it over on the n55 thread on burger tuning's forum. I don't have the link now but try searching for that

[Drpoomanchu]

Originally Posted by OverRev

Hi, fellows. I installed JB4 on my 2015 M235i today. Everything is pretty straight forward for the install after a little research online. However, i couldn't find any written menu/instruction for the JB4 steering CANBUS control. I searched BMS web site and all i found is a video posted from N54Tech forum but i have a 2015 M235i with N55 and my JB4 has the most updated firmware ( because it's new from BMS). I am not sure if the option menu is identical to the demo video and i don't wanna "TRY". I tried BMS web support and there in nothing to download or look at. does anyone here know where i can find a written menu for the JB4 option menu?

http://www.n54tech.com/forums/showpo...33&postcount=1

The video at the bottom is where i learned to navigate the menu but do yourself a favor and purchase the rev 3 bluetooth dongle. It will make map switching, logging and everything else so much easier

[OverRev]

thanks for the inputs, guys. this is a little confusing at the beginning but not bad after knowing i would only use it to change map and set my exhaust value open/close.