08-21-2017, 08:34 AM | #1 |
Brigadier General
2785
Rep 3,681
Posts |
Rear Alignment
Hey guys.
The focus is always on the front, and it seems folks are gravitating to -2.75 with 0 toe after some testing on the track. Just curious where you all are ending up with your rear alignment? I've gone as far as -2.2, but it seemed too much based on treadwear and loose rear traction coming off the corner. I've gone back to -2.0 and it helped, but I still wonder if less would be better. Also, I've stayed consistent with 0.3" toe in the rear based on my shop's recommendation, but no one seems to have a good idea what rear toe should be. Obviously the tires you run will have an impact on this (RE-71R and R888R for me), but what have been you all's experiences? Thanks. Last edited by ZM2; 08-21-2017 at 09:07 AM.. |
01-25-2018, 05:43 PM | #3 |
Lieutenant
300
Rep 466
Posts
Drives: M2CS
Join Date: Oct 2008
Location: Los Angeles
|
I always run toe in on the rears.
As you pick up speed and up to speed, the toe in will start toeing out. Even at speed you want a little toe in. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|