|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Amp Install 335is, tapping smart battery help
|
|
09-16-2017, 04:58 PM | #1 |
New Member
6
Rep 9
Posts |
Amp Install 335is, tapping smart battery help
Installing amp. I have an ebay distribution block 4 gauge I want to snap in. Confused by the blue and grey circles on the battery which one is ok to use. Thanks! See picture below. Specifically is there a difference between snapping my wire into blue slot, grey slot. Battery so confusing and not alot of literature on it.
https://drive.google.com/file/d/0B9J...ew?usp=sharing Last edited by BoominBimmer; 09-16-2017 at 05:07 PM.. Reason: link more description |
09-16-2017, 06:31 PM | #2 |
Lieutenant General
1911
Rep 13,104
Posts |
From the factory not all those slots may not be populated with
active blades/fuses. So be sure to check to see if you have and active one. And they are part of a fusible link array . Somewhere there is a picture with values and they are suppose to be labeled underneath the plastic cover I have been told . (These are fuses coming right off +12 ) electical e90 pdf http://www.google.com/url?sa=t&rct=j...,d.cGU&cad=rja http://www.google.com/url?sa=t&rct=j...85464276,d.cGU http://www.google.com/url?sa=t&rct=j...85464276,d.cGU Also there is a stereo subforum here http://www.e90post.com/forums/forumdisplay.php?f=27 Here it is http://www.e90post.com/forums/showth...66&postcount=5 Last edited by ctuna; 09-16-2017 at 07:06 PM.. |
Appreciate
0
|
09-19-2017, 03:23 PM | #4 |
Lieutenant
233
Rep 564
Posts |
|
Appreciate
0
|
09-19-2017, 04:27 PM | #5 |
Private
3
Rep 72
Posts |
Are there any of these 12V connectors/"Universal socket housing" plugs that will connect to the 12V Positive of the battery and allow a 4Ga wire to directly connect to an amp? I have one now that has 2 8Ga wires, but would like two separate ones with 4Ga each if possible.
|
Appreciate
0
|
09-19-2017, 05:06 PM | #6 |
Lieutenant General
1911
Rep 13,104
Posts |
Technic used to sell a stand alone power kit as shown
in this Hi Fi harness kit https://technicpnp.com/product/hifi-harness-xd-kit/ Or you can buy the raw connector. Yes you can buy the fuse arrays from BMW or maybe some other source. I much like gong of the battery lug tightening screw better as it does threaten the fuse array.(with a ring connector) |
Appreciate
0
|
09-19-2017, 07:24 PM | #7 | |
Private
3
Rep 72
Posts |
Quote:
|
|
Appreciate
0
|
09-19-2017, 11:48 PM | #8 |
Lieutenant General
1911
Rep 13,104
Posts |
You can look up the connectors on realoem
http://www.6post.com/forums//convers...152374&u2=1065 Or ask Technic for the part number From Technic post One last time (I posted these P/N before): Woofer housing: 61136901731 Woofer housing pins: 61138364835 Woofer socket: 61136984750 Woofer socket pins: 61138364838 Speaker housing: 61138373583 Speaker housing pins: 61130006664 Speaker housing socket: 61136925634 Speaker housing socket pins: 61130006663 MOST socket: 61138387214 Battery dist block housing: 61136925176 (single) Battery dist block housing: 61136925166 (double) Battery dist block housing pins: 61136920092 HiFi OEM amp female Connector: 8364862-03, 8364882, 8364884 http://www.e90post.com/forums/showth...ower+Connector Last edited by ctuna; 09-20-2017 at 12:15 AM.. |
Appreciate
0
|
Bookmarks |
Tags |
amp install, battery terminal |
|
|