|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Engine not turning over on start, all injector codes
|
|
09-18-2017, 03:00 PM | #1 |
New Member
3
Rep 19
Posts |
Engine not turning over on start, all injector codes
Hi all,
Hoping to get some help with this issue. Searched some but didn't find anything directly related. 2007 328i. 89k miles. E90 not turning over on start. Press the brake and lots of clicking but no starting. Recently car threw code and had the Eccentric Shaft Sensor and VCG replaced about 400 miles ago and drove fine afterward. The other day the car just wouldn't start. AAA came out to work, checked battery and it was fine, no voltage issues. For 3 hours wouldn't start. Had it towed to mechanic and it started immediately off the flatbed! They had the car for 4 days and it started up fine 40+ times no issues. So today I drive the car home and park in my garage. Come out an hour later and it's doing the same thing! Now I'm getting codes below: p0270 p0264 p0276 p0267 p0273 p0261 Apparently all the injectors are involved? Thinking a circuit issue vs fuel pump? Anybody have ideas where to start? Past few weeks with my beloved E90 are frustrating. Thanks. |
09-19-2017, 08:56 AM | #4 |
E82 Mudflap Ambassador
2214
Rep 2,219
Posts
Drives: '08 128i
Join Date: May 2016
Location: Orlando, FL
|
Yeah make sure those grounds that come off the ignition and injector harnesses are clean and well connected. One may have gotten tweaked juuuust enough during the VCG service
__________________
My 2008 128i - Sparkling Graphite/Beige - Sport pkg - 6MT - Click me!
Parents' 2014 528i - Mineral White/Ivory White - fully loaded Instagram @Andreys_128i and @Honda.Bito |
Appreciate
0
|
Bookmarks |
|
|