[AFF]

Hi Guys,

I wonder if anyone can help...

I have just replaced my F36 sportline front bumer with an msport and the M8 fixings across the bottom of the bumper do not see to line up.

Wouldnt bother me so much if I wasnt looking for a carbon fibre lip which I assume will require these fixing points.

[teaston]

Guess the MS bumper requires a different underbody panel.

[AFF]

Originally Posted by teaston

Guess the MS bumper requires a different underbody panel.

Not sure as realoem doesnt provide an option between msport or SE

Anyone else had this problem?

[UKF30]

SE bottom tray holes don’t match with M sport ones , you can either screw it on or replace the whole .

I would say screw it all even splitter , wouldn’t be able to notice as it’s right underneath the car , but make sure you add metal thingy on the inside when screwing just to make sure that screw never get loose .

I have changed SE to M sport bumper on F30 assuming it will be same underneath and mine is still find after a year .

[AFF]

Originally Posted by UKF30

SE bottom tray holes don’t match with M sport ones , you can either screw it on or replace the whole .

I would say screw it all even splitter , wouldn’t be able to notice as it’s right underneath the car , but make sure you add metal thingy on the inside when screwing just to make sure that screw never get loose .

I have changed SE to M sport bumper on F30 assuming it will be same underneath and mine is still find after a year .

Unfortunately I cant screw it in as the undetfloor barely meets the msport bumper. Its almost like the bottom of the bumper is not as long as the se bumper. I have just used cable ties for now, will need to re-evaluate the situation once the splitter comes along I guess