[Rustic_potato]

Was almost home and Bam!!, smoke all over hood.
Found a hose that totally came off, but need help identifying.
I looked at part diagrams but got confused-.-''


Thanks in advance

View post on imgur.com

[mojobmw_e90]

https://m.ebay.com/itm/Engine-Coolan...YAAOSwjvJZSPw6

[mojobmw_e90]

https://m.ebay.com/itm/BMW-335i-1153...kAAOSwxxdZZkyw

Or this. Throw a clap on the oem hose and worry free

[Rustic_potato]

Originally Posted by mojobmw_e90

https://m.ebay.com/itm/BMW-335i-1153...kAAOSwxxdZZkyw

Or this. Throw a clap on the oem hose and worry free

Thanks a lot! Have you swapped this out before? I see people mention using a dremel to cut the clamp out, but the way I see it, I should not need to cut it..Am I missing something ou?

[BashShah]

There are 2 Bolt holding it to the engine. (I think 12mm forgot.)
these should be easy....and then pull out or twist and pull.
there is an O ring you will need to replace also.

Try REALOEM for your Part Numbers:
http://www.realoem.com/bmw/enUS/show...diagId=11_3972

in order to search them on ebay.
type "BMW then partnumber"

Looking at the picture you posted.... I am curious to ask what color is your Coolant.
strong advise use OEM from dealer......cost is the same compared to most out there.

[mojobmw_e90]

Originally Posted by Rustic_potato

Thanks a lot! Have you swapped this out before? I see people mention using a dremel to cut the clamp out, but the way I see it, I should not need to cut it..Am I missing something ou?

The oem clamp is a one time use clamp. It's installed from the factory and has 0 adjustment compatability

[Rustic_potato]

Thanks Everyone! Finished up today.
That oil residue could be from my older oil leaks. Coolant has ben clean for the past 2 years..

Big TIP for anyone else doing this: Remove the Radiator FAN!!!!