[paul223]

I am doing Pure stage 1 PWG installation next week. Below are hardware pics, I took some measurements on diameter of turbo intake pipe (bought from AZmcracer) the turbo intake side so you guys can see the difference. The car currently has MIssion Performance stage 2 tune. I installed the downpipe and Wagner tuning intercooler ( I got it for $425 from eBay, it did not include hardware clamps but I made L clamps from flat iron bar I had). Now the question I have is how to log data since MP software does not have capability. I think I should have went with MHD since it is cheaper and able to log data.

[Stück]

You can use any number of phone based apps for logging, or you can use the software MP recommends on a windows device to log (What I do)

[paul223]

Originally Posted by Stück

You can use any number of phone based apps for logging, or you can use the software MP recommends on a windows device to log (What I do)

Which softer is recommend by MP?

[mike@x-ph.com]

Good luck

[Stück]

Testo is what MP recommends and I use. It requires some fairly high level user configuration though.

Did you rattle can bomb that turbo CHRA or did Pure ?!

[paul223]

I ordered pure turbo from Mike @ xph, it came like this, should I be worried?

[mike@x-ph.com]

Originally Posted by paul223

I ordered pure turbo from Mike @ xph, it came like this, should I be worried?

Sorry just saw your post.

Please let me know if you need any help

[paul223]

It is already installed and working good along with high flow turbo inlet. It is an improvement in power good amount. Car feels more naturally aspirated and responsive with more power without doing any tuning.