|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Retrofit USB in armrest to enable combox update
|
|
07-29-2018, 01:07 AM | #1 |
Enlisted Member
23
Rep 49
Posts |
Hi
I want to software update my combox, because i have some bluetooth quality and song information issues, when using android devices. Strangely iPhone works perfectly. Well, can anyone provide me with a link for the parts/cable, a DIY installation guide, and DIY coding guide using NCS Expert Car: 2011 320d 184hk E90 M-sport aut. Thanks. UPDATE: Retrofit and coding done. It all worked out!!! I Used this kit from eBay. https://www.ebay.com/sch/i.html?_fro...23608&_sacat=0 Coding guide: Adding Option 6FL Step One – Adding $6FL Open INPA and verify that it is connected properly. Close INPA when verified. Open NCSEXPERT and load profile Expertenmosus (Werkseinstellung). Press VIN/ZCS/FA (F1) Press ZCS/FA f. ECU (F3) Choose the E89 chassis Choose CAS or NFRM Press Enter FA (F2) Choose E89 Enter VIN: WBAxxxxxxxxxxxx OK Add $6FL OK Press Back (F6) Press Process ECU (F4) Choose CAS Press Change Job (F2) Choose FA_WRITE OK Press Execute job (F3) Press Change ECU (F1) –> Choose NFRM Press Execute job (F3) Step Two – Code changes to CIC Open INPA and verify that it is connected properly. Close INPA when verified. Open NCSEXPERT and load profile Expertenmosus (Werkseinstellung). Press VIN/ZCS/FA (F1) Press ZCS/FA f. ECU (F3) Choose the E89 chassis Choose CAS or NFRM Press Back (F6) Press Process ECU (F4) Choose CIC Press Change Job (F2) Choose SG_CODIEREN Press Execute job (F3) Press Process ECU (F4) Choose MEDIA Press Execute job (F3) Done Connected the eBay cable kit (Used black COMBOX plug) and Downloaded Bluetooth update from BMW update site, and updated. Now song information it displayed perfect. Last edited by MrNice2028; 08-30-2018 at 02:23 PM.. |
07-29-2018, 09:38 AM | #2 |
Lieutenant Colonel
398
Rep 1,579
Posts |
Others will comment on the coding but as for the wiring see below.
I have not tried this but I think the aftermarket USB will plug to the combox. Some of the plastic plug may need to be trimmed with a razor. Then you can do the above software update from the trunk. Using the correct arm rest parts will be over $75 US. https://www.ebay.com/itm/USB-Cable-A...itleDesc=0%7C0 |
Appreciate
0
|
07-29-2018, 09:56 AM | #3 | |
Enlisted Member
23
Rep 49
Posts |
Quote:
Thanks smassey |
|
Appreciate
0
|
07-29-2018, 10:20 AM | #4 |
Lieutenant Colonel
398
Rep 1,579
Posts |
Some basic coding will need to be done to enable the USB port on the combox. You will want to add 6FL in the FA, write it to the CAS and then do a SG reset on the combox. I probably said that wrong so hopefully others will comment but do your research. http://codinge90.com/ncs-expert-how-...vehicle-order/
Then do the below link to update the bluetooth software on the combox. I will PM you a vin so you can download the software. https://www.bmw.com/en/footer/software-updates.html |
Appreciate
0
|
07-29-2018, 11:08 AM | #5 | |
Enlisted Member
23
Rep 49
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|