[Godzilx]

I have a 2007 335 made in 09/06 with an FRM1.
1. Is bimmercode fully compatible with my car? I've heard mixed responses but cannot find anything
2. If it is, will I have the option to code out my amber corners?
3. Is it compatible with MHD? If I retune will I lose my changes from bimmercode?
Any help appreciated

[TunafishE93]

I believe you can they are hooked up to the footwell module.. You can email bimmercode they will tell you for sure.. Mine I can't because they are ran with the license plate light for some reason but mines also 2011 and they changed wiring in 2010..

[mweisdorfer]

Originally Posted by Godzilx

I have a 2007 335 made in 09/06 with an FRM1.
1. Is bimmercode fully compatible with my car? I've heard mixed responses but cannot find anything
2. If it is, will I have the option to code out my amber corners?
3. Is it compatible with MHD? If I retune will I lose my changes from bimmercode?
Any help appreciated

MHD reprograms the ECU. MHD will have no bearing on the FRM module as a result

[Godzilx]

Originally Posted by mweisdorfer

MHD reprograms the ECU. MHD will have no bearing on the FRM module as a result

Can I use the bimmergeeks OBD cable I used for mhd with bimmercode?

[TunafishE93]

You should be able too.. Here are the options that pop up for me..

[TunafishE93]

If I did it again I would go with protools instead of bimmercode.. They just cause they have other options besides coding (at additional price) but that's just my opinion..

[Godzilx]

Originally Posted by TunafishE93

If I did it again I would go with protools instead of bimmercode.. They just cause they have other options besides coding (at additional price) but that's just my opinion..

Downloaded protools and bought the coding pack. Literally will not let me code anything. Once I rewrite it says to cycle ignition and when I go back to look at the codes, they're all back to stock. Afraid I just wasted $75

[TunafishE93]

Try their facebook "Bimmergeeks ProTool" lots of support there. They will get you taken care of..

[TunafishE93]

The little I read on it ... You code with car running.. When it says cycle ignition, turn off car, pull keys, insert keys, start car.. Not sure if that what's your doing..