Bimmerpost
3
/
4 Series
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Technical Topics Cosmetic and Lighting Modifications (exterior & interior) Any installed a Front Lip spoiler from Ikon Motorsports?

Post Reply
 
Thread Tools Search this Thread
      03-23-2020, 02:03 PM   #1
saido
Private First Class
71
Rep
101
Posts

Drives: M340i
Join Date: Feb 2020
Location: Miami, FL

iTrader: (0)

Any installed a Front Lip spoiler from Ikon Motorsports?

I purchased the carbon fiber lip from Ikon Motorsports for my G20 but the holes on the lip spoiler are too large to use the existing plugs on my bumper.

Hoping someone has installed this lip before and has some recommendations.

Thanks!
Appreciate 0
      03-25-2020, 05:37 AM   #2
Chuckyarla
Captain
Ireland
289
Rep
829
Posts

Drives: G11 730d M-Sport 2018
Join Date: Dec 2016
Location: Ireland

iTrader: (0)

With my lip spoiler I used the large holes to line the spoiler up over the existing plugs then put self-taping screws through the small holes. All was fine.
Appreciate 0
      03-25-2020, 08:14 AM   #3
saido
Private First Class
71
Rep
101
Posts

Drives: M340i
Join Date: Feb 2020
Location: Miami, FL

iTrader: (0)

Quote:
Originally Posted by Chuckyarla View Post
With my lip spoiler I used the large holes to line the spoiler up over the existing plugs then put self-taping screws through the small holes. All was fine.
Thanks for the tip, will check that option out!
Appreciate 0
      03-25-2020, 09:15 AM   #4
sanch8
Private First Class
67
Rep
105
Posts

Drives: 2019 330i
Join Date: Nov 2018
Location: Toronto

iTrader: (0)

The large holes are there to make space for the existing plastic rivets under the bumper. You only need to remove the 6 (three on each side) 10mm bolt head screws under the bumper. Hold the spoiler in position and then screw them back in.
Appreciate 0
      03-25-2020, 09:20 AM   #5
Stevek3670
New Member
11
Rep
28
Posts

Drives: M340i
Join Date: Mar 2020
Location: Oakland

iTrader: (0)

I actually just installed mine yesterday, but there are 3 screws that BMW used for the underpans that you are supposed to take out. The holes on the IKON front lip lines up with these screws. The larger holes are there for the plastic push pins.

I have attached pics of the factory BMW screws I am talking about. There is also a video if you look for it on youtube of another forum member who did a DIY front lip G20.

For the middle part of the lip, you do need to drill 4 holes with some self tapping screws.

Overall impressions is that I like how the front looks with the lip more so than without. However, I do think that the fitment can be better. It needs to come more towards the side so it wraps around the wheel arch. Also I know I can't compare a $160 lip to the factory M performance one but definitely see where Ikon cut cost. Below the wheel arch the BMW one is solid so you can't see in but the Ikon lip is exposed.

Please excused my dirty car.
Attached Images
         
Appreciate 0
      03-25-2020, 01:01 PM   #6
saido
Private First Class
71
Rep
101
Posts

Drives: M340i
Join Date: Feb 2020
Location: Miami, FL

iTrader: (0)

sanch8 Stevek3670

Thank you both for your input, this is great information and photos!
Appreciate 0
      03-25-2020, 04:20 PM   #7
Stevek3670
New Member
11
Rep
28
Posts

Drives: M340i
Join Date: Mar 2020
Location: Oakland

iTrader: (0)

Of course, hope your install goes well. Post some pics of what it looks like after install!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:41 AM.




g20
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST