[MSBe90]

so i accidentally ran over a tire on the interstate the other day.
Ripped out front and rear fender liners on the passenger side. Took out my fog light, as well as the wiring connector. Took out the horn wiring and connector. and i believe it took out the ambient temp. sensor as my dash reads -40*


Now i have the liners pulled out for now. i noticed the wiring harness that follows down the pass. fender it comes down and kind of T's off to the front part of the bumper. There are a couple of brown wires that got forcefully ripped. as well as a blue/red wire and a couple of other wires.


Does anyone have links to where i can find proper wiring diagrams?
or does anyone know exactly what color wires to where?

car is an 06 330i

[jwalker87]

Check out realoem.com - here is a link to the website for an e90 330i with production date 12/2005. There's a category for "Vehicle Electrical System" that might help. Unfortunately, there likely won't be a single source of information; you'll have to dig around and see what might be in the vicinity of that area.

https://www.realoem.com/bmw/enUS/par...5-E90-BMW-330i

If you have a Bentley manual, I believe those also have wiring schematics and color coding / pinouts that may help.

Good luck! I ran over a semi retread a few years ago, but luckily all I damaged was the front bumper, one fender liner, and the big plastic undertray; no electrical or other mechanical woes! And I had wanted an M3-rep bumper for a while anyway

[marvinstockman]

https://www.newtis.info/ for diagrams and everything you'll ever need.

[MSBe90]

Originally Posted by marvinstockman

https://www.newtis.info/ for diagrams and everything you'll ever need.

that helped a bunch! pretty sure ive got the cut wires narrowed down to the horn, fog light, and ambient temp sensor! printed out the diagrams as well

[MSBe90]

Originally Posted by Samson Choi

http://many.fuse12.klictravel.nl/bmw...g-diagram.html

sorry not paying for anything that should be openly available to the public

[drymite]

Do you by anychance still have the diagrams and info im stuck on the same wiring for my ambient air temp and the pervious link doesnt work.

[gbalthrop]

Originally Posted by drymite

Do you by anychance still have the diagrams and info im stuck on the same wiring for my ambient air temp
and the previous link doesn't work.

"newTIS.info" was forced to close 10/2020. ISTA diagram attached. Wires go to Blue X14271 connector on JBE.
George