[austinf32]

What's going on everyone.

I have just install BC Coilovers on my 428i Coupe M-Package and the shop told me i will have an error message that is "chassis function restricted drive moderately".

Has anyone else gotten is error message after installing coilovers and how could i fix this problem. Currently out of warranty as well. Thanks.

[DreamerJoe]

Originally Posted by austinf32

What's going on everyone.

I have just install BC Coilovers on my 428i Coupe M-Package and the shop told me i will have an error message that is "chassis function restricted drive moderately".

Has anyone else gotten is error message after installing coilovers and how could i fix this problem. Currently out of warranty as well. Thanks.

have you scanned for codes, or checked if their is an error in the idrive vehicle status?

[cfm56d7b]

Originally Posted by DreamerJoe

have you scanned for codes, or checked if their is an error in the idrive vehicle status?

Without scanning for codes first, it would be difficult to identify the next steps.

If your car is already beyond the warranty period, investing in a code scanner is a good idea.

[obert]

Originally Posted by austinf32

What's going on everyone.

I have just install BC Coilovers on my 428i Coupe M-Package and the shop told me i will have an error message that is "chassis function restricted drive moderately".

Has anyone else gotten is error message after installing coilovers and how could i fix this problem. Currently out of warranty as well. Thanks.

Was the battery disconnected during the install? And if yes has the car been driven since?

I ask because a lot of the times I disconnect the battery and hook it back up. I will get that warning light and after driving the car for a minute it will go away.

Had this happen at a tint shop as well when they hooked up a battery charger to the wrong negative spot under the hood. when away as well after driving the car.

[austinf32]

Thanks for the answers. Will be planning to scan the car this week.

[T0NE*F32]

Is your car equipped with EDC?

[austinf32]

Originally Posted by T0NE*F32

Is your car equipped with EDC?

Yes i believe so

[T0NE*F32]

Unless you also installed an EDC cancellation kit? There's the problem. You can either purchase one or have it coded out.

[im_an_alien]

Originally Posted by austinf32

What's going on everyone.

I have just install BC Coilovers on my 428i Coupe M-Package and the shop told me i will have an error message that is "chassis function restricted drive moderately".

Has anyone else gotten is error message after installing coilovers and how could i fix this problem. Currently out of warranty as well. Thanks.

The shop unplugged your electronic dampers, installed coilovers, threw everything back together and couldn't figure out why they had a drivetrain error?

[austinf32]

Originally Posted by T0NE*F32

Unless you also installed an EDC cancellation kit? There's the problem. You can either purchase one or have it coded out.

I don't have the kit but for the 4 series only KW sells a EDC module so i have to see if it works with BC coils if not i have to code it out. Thanks for the help

[austinf32]

Originally Posted by im_an_alien

The shop unplugged your electronic dampers, installed coilovers, threw everything back together and couldn't figure out why they had a drivetrain error?

They told me after the coils installed about the error and i could get it coded out smh. I just was looking if anyone else had the same situation as me.