[browny23]

Hey I have inpa installed and working however my ista won't connect the light on my dcan cable flickers then I get the error saying vehicle not found etc. I also noticed on my list of installed modules in ista settings the vehicle communication one doesn't show up please help

[gbalthrop]

I had to change the "Administration (Wrench/Spanner icon) > VCI Config Tab > Interface Type" setting to "Ediabas Default Settings (ediabas ini)" to be able to connect to my E91 with K+DCAN Cable.

At opening screen, click on the "Wrench/Spanner" icon on top line. A Dialog box titled "Administration" should appear. Click the right-hand tab, "VCI Config"; then at top-left of next option box, click "ediabas default settings".

Please let us know if that solves the issue.
George

[browny23]

I've done this it is set to ediabas my cable even flickers the light to say it's doing something inpa works 100%

[ctuna]

ista problems
https://www.e90post.com/forums/showthread.php?t=1661945
https://www.e90post.com/forums/showthread.php?t=1581663

some of the things other people have found are contained in the above
threads.

[browny23]

Already looked at these and they don't relate tomy problem

[Wolf 335]

Latency setting set to 1, in your device manager port setting?

If you did windows update it can change the port latency and it wont function properly.

[browny23]

Yeah it's set to 1

[browny23]

Bump help someone

[dpaul]

If this is still an issue, have you made sure that obd.ini lists the same com port your cable is on?