03-09-2022, 01:12 PM | #1 |
New Member
1
Rep 8
Posts |
G30 Gesture Control Retrofit coding problem
My G30 did not come with the Executive Package, one of the things I was missing was the Gesture Control option.I found on ebay FZD roof module with camera and I replaced it with mine.I pulled and connected the two wires CAN H and CAN L to the BDC module.
Now I have a problem encoding the FZD module.I use ENET cable and E-SYS 3.30.1 and psdzdata 4.32.33. I was able to add option 6U8 to the FA and activate it,but when I follow the instructions to add the Cafd files I get an error message when I click “detect CAF for SWE.”I was able to successfully identify the istep, but when I click Expert mode>coding>Read ECU and then click on FZD from the list>detect CAF for SWE I get this... failed to get CAF for SWE "swfl_00002f48-003_027_000" When I look in the swfl folder I don't have this file. Does anyone have this file in their psdzdata folder and whether he can send it to me. I tried to flash FZD ecu but when it should start to fleshing new dump they will not.Constantly shows 0% and then terminates. Can anyone help me how to solve this problem? Thank you... |
03-12-2022, 10:20 AM | #2 |
BMW Aficionado
1377
Rep 1,848
Posts |
what PSdZDATA set are you using? FULL, not lite correct? What is the ISTEP version you are targeting?
Last edited by CaboM4; 03-12-2022 at 11:06 AM.. |
Appreciate
0
|
03-14-2022, 06:38 PM | #5 | |
BMW Aficionado
1377
Rep 1,848
Posts |
Quote:
Versions checked: 4.34.25 4.32.20 4.31.31 4.31.12 4.27.331 4.21.32 The remaining older FULL PSdZDATA sets I have are: 4.15.12 4.10.21 4.05.22 3.63.3 3.55 3.51.3 2.54 2.53.5 2.52.5 2.51.3 |
|
Appreciate
0
|
03-16-2022, 11:20 AM | #7 |
New Member
1
Rep 8
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|