Installing Riss Racing Oil Catch Can ... Tips ?

[UR2SLOW1]

I'm installing the catch can in the next day or two........ anyone out there who's already installed this unit have any tips or advice ?? Thanks

[Riss Racing]

Originally Posted by UR2SLOW1

I'm installing the catch can in the next day or two........ anyone out there who's already installed this unit have any tips or advice ?? Thanks

If you get stuck shoot us a call, or email me. I will give you a techs personal cell phone to reach 24/7 :thumbup:

The full pic DIY PDF is located on www.RissRacing.com under DIY. Thanks!

[nordique14]

Read this thread. Specifically posts 64 & 79. They indicate the errors in the online DIY.

http://www.1addicts.com/forums/showthread.php?t=11322

In addition to the info above, I would point out that the clips that look like 4-leaf clovers are a pain to get off. You need to be pulling on the hose while you release each of the 4 sides of the clover. That is a pain since it is difficult to get to all sides in the tight space.

Also, make sure you don't drop any screws. You will have to remove the underpanel to get them back. I got lucky and had a spare bolt that matched the one I dropped so I didn't have to do that.

[Riss Racing]

Just to make things easier on everybody from here on out. While they are making the Intake DIY I have the guys making a VIDEO DIY for the oil catch can! They are working on it as I type too you....