TC Kline D/A Coilovers (settings & alignment)

[S2peed]

Hello,

Wondering if I can get some input on what settings you guys are running with your coilover setup.

I just installed TCK DAs w/ camber plates and I need to get an alignment, what camber & toe settings will suit best for street? during track days I can slide the camber to -2.5.

Thanks!

[jmillet]

Originally Posted by S2peed

Hello,
Wondering if I can get some input on what settings you guys are running with your coilover setup.
I just installed TCK DAs w/ camber plates and I need to get an alignment, what camber & toe settings will suit best for street? during track days I can slide the camber to -2.5.
Thanks!

I recently did the same install and set the front alignment per the TCK instructions
http://www.bimmerfest.com/forums/sho...7&postcount=74
At -2.0 degrees front camber I have 0.06 degrees toe in and 7.7 degrees caster.
At maximum -3.5 degrees camber for the track the toe is at 0.1 degrees out.
In the rear I'm running -2.0 degrees camber and 0.18 degrees toe in.
I have the ride height at 25.25 inches front and 25.75 inches rear measured from the bottom of the side rail to the ground; you want at least 0.5 inches of front rake.

[S2peed]

Thanks Jim