What do you think of this ?

tamim · 04-23-2010, 06:19 PM

I got this trolley jack: http://www.canadiantire.ca/AST/brows....jsp?locale=en

and this http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber

and a 20 inch 3-way lug wrench to change my wheels. Bought brake cleaner and wd40 along with sand paper to clean up any rust.

What do you guys think ?

ENINTY · 04-24-2010, 05:41 AM

The bolt head size for BMWs is 17MM. You'll need a 6" of 9" extension bar to get enough clearance past the fender to use the torque wrench. I posted a DIY on how to lift the E90 using a trolly jack. Hope it helps. Be safe. You got jack stands too, right?

tamim · 04-27-2010, 09:01 PM

Quote:

Originally Posted by ENINTY

The bolt head size for BMWs is 17MM. You'll need a 6" of 9" extension bar to get enough clearance past the fender to use the torque wrench. I posted a DIY on how to lift the E90 using a trolly jack. Hope it helps. Be safe. You got jack stands too, right?

I got the 3 inch deep adapters that did the job. I've just changed my wheels ...

04-23-2010, 06:19 PM	#1
tamim New Member 5 Rep 29 Posts Drives: 2006 BMW 330i Join Date: Nov 2009 Location: Mississauga iTrader: (0)	What do you think of this ? I got this trolley jack: http://www.canadiantire.ca/AST/brows....jsp?locale=en and this http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber and a 20 inch 3-way lug wrench to change my wheels. Bought brake cleaner and wd40 along with sand paper to clean up any rust. What do you guys think ?
	Appreciate 0 Tweet Quote

04-24-2010, 05:41 AM	#2
ENINTY Banned 173 Rep 3,415 Posts Drives: 2006 325i Sport Join Date: Jun 2006 Location: Virginia iTrader: (0)	The bolt head size for BMWs is 17MM. You'll need a 6" of 9" extension bar to get enough clearance past the fender to use the torque wrench. I posted a DIY on how to lift the E90 using a trolly jack. Hope it helps. Be safe. You got jack stands too, right?
	Appreciate 0 Quote