Check Valve placement with labonte IFS-30

themyst · 05-07-2010, 09:53 PM

I am assuming it does not matter where I put it but I figure I should ask first. I have my check valve in the engine bay with 6 inches of tubing leading to the nozzle. Should I put the check valve behind the labonte pump inlet or can I leave it just the way it is?

Sparky66 · 05-07-2010, 11:30 PM

Check Valve?? I assume you mean the FCS-10 Fluid Control Solenoid. The solenoid goes between the injector nozzle and the IFS-30 Injection FailSafe unit , as close to the injector as possible.
Follow the instructions that came with the unit:

themyst · 05-10-2010, 10:43 AM

I have a check valve in place of the solenoid, so it would perform the same function. According to that diagram, the unit should be placed before the check valve, making the install that much easier. Thanks!

05-07-2010, 09:53 PM	#1
themyst Major General 177 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	Check Valve placement with labonte IFS-30 I am assuming it does not matter where I put it but I figure I should ask first. I have my check valve in the engine bay with 6 inches of tubing leading to the nozzle. Should I put the check valve behind the labonte pump inlet or can I leave it just the way it is? __________________ E90 LCI N54 6AT
	Appreciate 0 Tweet Quote

05-10-2010, 10:43 AM	#3
themyst Major General 177 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	I have a check valve in place of the solenoid, so it would perform the same function. According to that diagram, the unit should be placed before the check valve, making the install that much easier. Thanks! __________________ E90 LCI N54 6AT
	Appreciate 0 Quote