JB Betrayal....!

GreekMaverick · 11-09-2010, 10:32 AM

After 4 years/75K (07 e92 35i 6MT) and every JB Product ever to be released installed in the car I decided to try the Pro....! (Sorry T

)

I Did drive few cars w' the procede and felt like the power was just as much as the JB or even more but the "HOW" the power was delivered was all a new feeling for me.

I had gotten used to the JB power delivery. now that I am thinking about it, it kinda felt like a G35 sedan. No matter how smooth you tried to apply that throttle the car always jerked forward like a bat out of hell

.
It def makes a great first impression but it wears off fast.

Anyways, like I said
I just got it with the trade in program and unfortunately won't be able to install it for another week, heading to NY for work.

Some things have me a bit puzzled.

There's def more going on in here than the JB, must be all those extra features

.

1) Do I need to purchase the remote map switching box?

2) I watched the Video for the V3 Rev 2 Install on the vishnutuning.com
And it did not say anything about the red wire that I have a Q mark next to it :/

3) This is a minor issue. But how come there are no written directions with step by step pictures of how the installation will progress ?
The cheaper JB3 Had it all included, What if I can't get online...

Review to come once installed and adapted.

enrita · 11-09-2010, 10:42 AM

1) no
2) progressive meth 0-5V input
3) no need to , very easy just watch the video plus its the same installation as jb3
congrats for the new tune. you will love it.

dzenno · 11-09-2010, 10:43 AM

red wire is a meth flow input 0-5V from a flow sensor in your meth kit (if you decide to get one)...otherwise, just leave it alone..v3 rev 2 video still applies

RiXst3r · 11-09-2010, 10:47 AM

The item you have labeled as "CANBUS" is not canbus... its just the serial port for updating maps,datalogging,etc...

the canbus is in the harness with everything else... it doesn't require you to hook anything up.

Congrats on the purchase

OpenFlash · 11-09-2010, 11:00 AM

Congrats on the new tune

The pic above shows an old pre-meth flow input harness. I'll have to update it today. But it should be of some help. Although probably not any more than the others that responded to you already.

dzenno · 11-09-2010, 11:03 AM

Nitrous activation input??

OpenFlash · 11-09-2010, 11:10 AM

Quote:

Originally Posted by dzenno

Nitrous activation input??

Yep... it will all be explained on the new website which Calvin has been working on diligently.

GreekMaverick · 11-09-2010, 11:34 AM

Dude...I got NOS....

GreekMaverick · 11-09-2010, 11:34 AM

Thanks for the answers guys.
Thanks Shiv.

GreekMaverick · 11-09-2010, 11:41 AM

Ok, Back to Q #1

remote map switching (box)

What does it do?

Benefits over having it and not?

Will I be able to switch maps from the cruise control handle with out it?

OpenFlash · 11-09-2010, 11:43 AM

Quote:

Originally Posted by GreekMaverick

Ok, Back to Q #1

remote map switching (box)

What does it do?

Benefits over having it and not?

Will I be able to switch maps from the cruise control handle with out it?

The remote switching box is obsolete now that you can switch maps with cruise control stalk (and DTC button). We haven't included them with our Procedes in over a year.

fisherbln · 11-09-2010, 11:44 AM

Quote:

Originally Posted by GreekMaverick

Ok, Back to Q #1

remote map switching (box)

What does it do?

Benefits over having it and not?

Will I be able to switch maps from the cruise control handle with out it?

It is no longer necessary now that you can switch maps via the DTC or cruise control stalk. Leave it out.

Edit: Shiv is too fast for me!

OpenFlash · 11-09-2010, 11:47 AM

Quote:

Originally Posted by fisherbln

Edit: Shiv is too fast for me!

That's not what she said.

heheh.. couldn't resist.

GreekMaverick · 11-09-2010, 11:53 AM

Very good...Thanks for the Quick response Shiv.

**335i** · 11-09-2010, 12:27 PM

some people dont have cruise stalk button, maybe shiv will make alternative method for those people lets say like wheels buttons will be used shiv are u planing this?

OpenFlash · 11-09-2010, 12:39 PM

Quote:

Originally Posted by **335i**

some people dont have cruise stalk button, maybe shiv will make alternative method for those people lets say like wheels buttons will be used shiv are u planing this?

Will soon have an option for those who don't have cruise control. You will be able to enter a special mode which will allow you use the buttons on the steering wheel for navigation.

import36 · 11-09-2010, 12:44 PM

Quote:

Originally Posted by **335i**

some people dont have cruise stalk button, maybe shiv will make alternative method for those people lets say like wheels buttons will be used shiv are u planing this?

DTC mapswitching works just fine!

**335i** · 11-09-2010, 12:45 PM

Quote:

Originally Posted by shiv@vishnu

Will soon have an option for those who don't have cruise control. You will be able to enter a special mode which will allow you use the buttons on the steering wheel for navigation.

thanks shiv for answering

**335i** · 11-09-2010, 12:46 PM

Quote:

Originally Posted by import36

DTC mapswitching works just fine!

yep but its mixing with DTC and DSC if i want to turn it off or on, not so convenient

lyndon_h · 11-09-2010, 02:54 PM

The title makes me think of Halo. Need to play some tonight.

Sparky66 · 11-09-2010, 07:33 PM

Quote:

Originally Posted by **335i**

yep but its mixing with DTC and DSC if i want to turn it off or on, not so convenient

It's all in the fingers(that's what she says)........Try double clicking the button a bit slower when you press the DTC button. This way it won't interfere with the DTC/DSC setting. Single pressing the button still switches DTC/DSC setting normally and without any map switch interference. I never had a problem.

**335i** · 11-10-2010, 02:34 AM

Quote:

Originally Posted by Sparky66

It's all in the fingers(that's what she says)........Try double clicking the button a bit slower when you press the DTC button. This way it won't interfere with the DTC/DSC setting. Single pressing the button still switches DTC/DSC setting normally and without any map switch interference. I never had a problem.

and if u want turn OFF both dtc and dsc u press and hold button wont it mixes with map switching...anyways all new stuf that shiv is going to release on steering wheel with buttons would help a lot and would be more comfortabile we wont need to leave hands from our wheel

11-09-2010, 10:32 AM	#1
GreekMaverick El Greco Capitan 309 Rep 1,051 Posts Drives: ///N54 Join Date: Dec 2006 Location: Wellington, FL iTrader: (1)	JB Betrayal....! After 4 years/75K (07 e92 35i 6MT) and every JB Product ever to be released installed in the car I decided to try the Pro....! (Sorry T ) I Did drive few cars w' the procede and felt like the power was just as much as the JB or even more but the "HOW" the power was delivered was all a new feeling for me. I had gotten used to the JB power delivery. now that I am thinking about it, it kinda felt like a G35 sedan. No matter how smooth you tried to apply that throttle the car always jerked forward like a bat out of hell . It def makes a great first impression but it wears off fast. Anyways, like I said I just got it with the trade in program and unfortunately won't be able to install it for another week, heading to NY for work. Some things have me a bit puzzled. There's def more going on in here than the JB, must be all those extra features . 1) Do I need to purchase the remote map switching box? 2) I watched the Video for the V3 Rev 2 Install on the vishnutuning.com And it did not say anything about the red wire that I have a Q mark next to it :/ 3) This is a minor issue. But how come there are no written directions with step by step pictures of how the installation will progress ? The cheaper JB3 Had it all included, What if I can't get online... Review to come once installed and adapted. Attached Images __________________ No, it's not new. It got 150.000+ miles on it
	Appreciate 0 Tweet Quote

11-09-2010, 10:42 AM	#2
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	1) no 2) progressive meth 0-5V input 3) no need to , very easy just watch the video plus its the same installation as jb3 congrats for the new tune. you will love it. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

11-09-2010, 10:43 AM	#3
dzenno Banned 273 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	red wire is a meth flow input 0-5V from a flow sensor in your meth kit (if you decide to get one)...otherwise, just leave it alone..v3 rev 2 video still applies
	Appreciate 0 Quote

11-09-2010, 10:47 AM	#4
RiXst3r 274 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	The item you have labeled as "CANBUS" is not canbus... its just the serial port for updating maps,datalogging,etc... the canbus is in the harness with everything else... it doesn't require you to hook anything up. Congrats on the purchase
	Appreciate 0 Quote

11-09-2010, 11:00 AM	#5
OpenFlash 1737 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Congrats on the new tune The pic above shows an old pre-meth flow input harness. I'll have to update it today. But it should be of some help. Although probably not any more than the others that responded to you already.
	Appreciate 0 Quote

11-09-2010, 11:03 AM	#6
dzenno Banned 273 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	Nitrous activation input??
	Appreciate 0 Quote

11-09-2010, 11:34 AM	#8
GreekMaverick El Greco Capitan 309 Rep 1,051 Posts Drives: ///N54 Join Date: Dec 2006 Location: Wellington, FL iTrader: (1)	Dude...I got NOS.... __________________ No, it's not new. It got 150.000+ miles on it
	Appreciate 0 Quote

11-09-2010, 11:41 AM	#10
GreekMaverick El Greco Capitan 309 Rep 1,051 Posts Drives: ///N54 Join Date: Dec 2006 Location: Wellington, FL iTrader: (1)	Ok, Back to Q #1 remote map switching (box) What does it do? Benefits over having it and not? Will I be able to switch maps from the cruise control handle with out it? __________________ No, it's not new. It got 150.000+ miles on it
	Appreciate 0 Quote

11-09-2010, 11:53 AM	#14
GreekMaverick El Greco Capitan 309 Rep 1,051 Posts Drives: ///N54 Join Date: Dec 2006 Location: Wellington, FL iTrader: (1)	Very good...Thanks for the Quick response Shiv. __________________ No, it's not new. It got 150.000+ miles on it
	Appreciate 0 Quote

11-09-2010, 12:27 PM	#15
335i Colonel 184 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	some people dont have cruise stalk button, maybe shiv will make alternative method for those people lets say like wheels buttons will be used shiv are u planing this? __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote

11-09-2010, 02:54 PM	#20
lyndon_h Lieutenant Colonel 40 Rep 1,917 Posts Drives: e90 Join Date: Jan 2007 Location: Madagascar iTrader: (2)	The title makes me think of Halo. Need to play some tonight.
	Appreciate 0 Quote