Bov on a Vishnu Charge pipe possible?

selshahE92 · 11-16-2011, 11:45 AM

I have the PWM meth system and charge pipe from Vishnu. I know it\'s not a perf mod but ever since having my MKII MR2 I\'ve loved the bov sound just wondering if it was possible with this setup and which one? Any probs I could face? Thanks

OpenFlash · 11-16-2011, 01:41 PM

Our N54 chargepipe can run any stock or stock-replacement bypass/blow off valve. If the nov you want to use isn't a direct stock replacement, you'd have to go with the n55 version of our chargepipe (it has no bypass valve flanges) and weld on the flange you need to use with that particular valve.

selshahE92 · 11-16-2011, 02:06 PM

Quote:

Originally Posted by shiv@vishnu

Our N54 chargepipe can run any stock or stock-replacement bypass/blow off valve. If the nov you want to use isn't a direct stock replacement, you'd have to go with the n55 version of our chargepipe (it has no bypass valve flanges) and weld on the flange you need to use with that particular valve.

Thanks shiv! That's the answer I was looking for! Oh and I also need to stop by and have you guys upgrade and unlock my rev2V5 to the 2.5!

OpenFlash · 11-16-2011, 02:20 PM

Quote:

Originally Posted by selshahE92

Thanks shiv! That's the answer I was looking for! Oh and I also need to stop by and have you guys upgrade and unlock my rev2V5 to the 2.5!

Sure thing. Just give us a call and we can set up an appointment

XPO186 · 11-16-2011, 03:37 PM

Are the chargepipes aluminum or stainless? It would be helpful to know since some BOV flanges can be sourced in either material.

Also, any (safety) concerns with methanol that is in the intercooler piping being discharged through the bov and into the engine bay? Are the widely used methanolr mixes damaging at all to adjacent plastic/rubber?

11-16-2011, 11:45 AM	#1
selshahE92 Second Lieutenant 12 Rep 202 Posts Drives: 2008 AW E90 M3 Join Date: May 2011 Location: United States iTrader: (2)	Bov on a Vishnu Charge pipe possible? I have the PWM meth system and charge pipe from Vishnu. I know it\'s not a perf mod but ever since having my MKII MR2 I\'ve loved the bov sound just wondering if it was possible with this setup and which one? Any probs I could face? Thanks
	Appreciate 0 Tweet Quote

11-16-2011, 01:41 PM	#2
OpenFlash 1743 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Our N54 chargepipe can run any stock or stock-replacement bypass/blow off valve. If the nov you want to use isn't a direct stock replacement, you'd have to go with the n55 version of our chargepipe (it has no bypass valve flanges) and weld on the flange you need to use with that particular valve.
	Appreciate 0 Quote

11-16-2011, 03:37 PM	#5
XPO186 Colonel 128 Rep 2,740 Posts Drives: E92 335i Join Date: May 2007 Location: Albany, NY iTrader: (19)	Are the chargepipes aluminum or stainless? It would be helpful to know since some BOV flanges can be sourced in either material. Also, any (safety) concerns with methanol that is in the intercooler piping being discharged through the bov and into the engine bay? Are the widely used methanolr mixes damaging at all to adjacent plastic/rubber? __________________
	Appreciate 0 Quote