|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Anyone ever changed the front hub assembly?
|
|
02-06-2012, 09:38 AM | #1 |
Second Lieutenant
9
Rep 227
Posts |
Anyone ever changed the front hub assembly?
My front right hub is starting to make a noise over 70mph and can feel slight vibrations in the steering wheel. Going to order the part and do it myself. Was going to see if anyone else did it and had tips. Nothing in the DIY section. Thanks guys
|
02-06-2012, 09:47 AM | #3 |
Some dude
92
Rep 1,780
Posts |
It's very straightforward. Remove the brake rotor and caliper, then the 4 bolts that hold the hub into the spindle. They are very tight with thread locker, so a big ratchet or air impact gun is needed. Replace the 4 bolts - do not reuse them. Torque to spec, 82lb-ft. Same for the caliper bracket to the spindle, but those bolts are reusable..
|
Appreciate
0
|
Bookmarks |
|
|