NCSEXPERT read request

[int2str]

If you have NCSEXPERT and have access to a 1M, could you please read out the "DSC" ECU module and post the content of the TRC file?

Thanks!

[KIYO]

I was not able to access DSC module.
These were the modules which I have access to.

The FSW_PSW dump is attached.
If you are referring the M1DSC module, it was as follows.

It is Austrian 1M without iDrive.
Production date: June 18 2011

FA/VO dump
E82_#0311&LWNZ%0B44$1CA$1CB$1CD$216$230$249$2N6$32 0$321$420$423$428$430$431$441$468$473$481$493$494$ 4WB$502$507$521$522$534$540$548$563$663$698$6FL$76 0$775$851$880$8TL$8TN*UR91-A070-EMOA


RPA
aktiv
MSA
nicht_aktiv
MDYNAMIC_MODE_USA
nicht_aktiv
LAT_EBD
aktiv
US_VEHICLE
nicht_aktiv
POHO
nicht_aktiv
DDS_PLUS
nicht_aktiv
ABSCHALTBARKEIT_DSC
aktiv
DRUCKMODELL_HA
wert_00
DRUCKMODELL_VA
wert_00
GETRIEBE_E82M
wert_00
PRE_MSR_E82M
nicht_aktiv
UEBERSTEUERN_MUE_0
wert_00
UEBERSTEUERN_MUE_1_2_M
wert_00

[int2str]

Thanks a lot!!
Looks like the DSC modules are completely different.

Really appreciate the help!

[eeghie]

Originally Posted by KIYO

I was not able to access DSC module.
These were the modules which I have access to.

The FSW_PSW dump is attached.
If you are referring the M1DSC module, it was as follows.

It is Austrian 1M without iDrive.
Production date: June 18 2011

MDYNAMIC_MODE_USA
nicht_aktiv
US_VEHICLE
nicht_aktiv
UEBERSTEUERN_MUE_0
wert_00
UEBERSTEUERN_MUE_1_2_M
wert_00

Interesting stuff: it appears that the US has some different MDynamic Mode and that the maximum slide angles (oversteer/uebersteuren) for regular and MDM mode are adjustable.