[idnan]

Hi guys,

I've got a set of Goodridge braided brake hoses for sale. The fronts are used and the rear caliper ones are brand new. Two of the hoses are missing, which are underneath the rear subframe and are almost impossible to do without dropping the subframe or having child hands and ninja skills.

I'm looking for £25 posted

Next is the 335i n54 airbox with K&N drop in filter which was on the car for less than 1000miles. It was only removed because I was told not to run it with my modifications.

Great if you want to create a hybrid intake like these:

http://www.e90post.com/forums/showthread.php?t=549965

http://www.e90post.com/forums/showpo...1&postcount=17

http://www.e90post.com/forums/showpo...7&postcount=24

Proven to be the best setup but I don't have the space to do it with my CP/FMIC/DV combo

Looking for £40 + Postage

Finally, is my B&M short shift #45123 and It reduces the gear stick throw by 30%

I had to remove a small amount of material to allow it to clear the larger m3 prop on my vehicle but this doesn't affect the quickshift in any way. The box is included but it requires two small spacers which are pennies from BMW.

It is over £150 new and fits the following:

BMW 1 Series, ’04-’09 E81, E82, E87, E88 all petrol engines,
BMW 3 Series, ’05-’10 E90, E91, E92, and E93 all petrol engines (except S65)
BMW 5 Series ’03-’09 E60 530i, 545i, 550i RWD only

Pics:
http://www.e90post.com/forums/showpo...28&postcount=3

Looking for £50 + Postage

[nicktyler]

Why can you not run stock and drop in K&N with your mods? Do you have many more than you mention in the post?

[idnan]

Originally Posted by nicktyler

Why can you not run stock and drop in K&N with your mods? Do you have many more than you mention in the post?

I've got RB turbos and Rob Beck himself recommended that I run cone filters instead of the standard airbox. Also, with the chargepipe and forge diverters I have, there is very little room for the airbox in the space anyway. I prefer the sound of the BMS intake over stock anyway.

[nicktyler]

Fair play. I'm having my turbos rebuilt but not upgraded, apart from stronger wastegates and was thinking I might do what you suggest with the DIY mutant intake and keep a spare stock intact just incase.

[Josh1a1h]

So the brake hoses are not plug and play as you are missing bits?

[magic77]

Was thinking of a short shift but it doesnt look like this fits according to the their website. States all Gas engines therefore must eqaute to petrol doh

[idnan]

Originally Posted by Josh1a1h

So the brake hoses are not plug and play as you are missing bits?

Still plug and play but you keep your original middle lines.

[Josh1a1h]

At pics mate?
They been on the car long?

[idnan]

fronts were on the previous owner's car for 9k and rears are brand new. I've got a BBK now so these are surplus to requirements.

[Dirty Tool]

PM'd!

[Josh1a1h]

Do you still have the brake lines mate?

[zltm089]

Good luck with the sale Idnan.

Top and well established forum member!

[windymissile]

Hi Idnan.
I don't suppose the airbox/filter is still up for grabs..??

WM