E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Overboost problem, all jb4 maps



Reply
 
Thread Tools Search this Thread
      03-18-2013, 07:46 PM   #1
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

Overboost problem, all jb4 maps

Ok so I've looked up everyone's over boost problem and Terry contacts them and they email him the logs but don't ever put what the solution to their problem was. So I'm asking for help, and this time ill post the solution to my problem so other people can just read it.

So E90 DCI, DPs, Exhaust, JB4.
In all gears boost levels go to the moon and hold. Only in gears after 3rd I throw codes and go into stock boost mode. Codes are typical overboost code and low boost mode engaged. I can repeat what happens all the time. Now could it be the following?

A). Boost solenoids are bad.
B). Turbos are bad.
C). Waste Gates are stuck.
D). Vacuum line leak.

Remember this happens in all maps. Even with JB4 turned off.

Feel free to pm me. Thanks
Appreciate 0
      03-18-2013, 08:28 PM   #2
AWil335i
Second Lieutenant
AWil335i's Avatar
12
Rep
281
Posts

Drives: 2007 E92 335i
Join Date: Oct 2012
Location: Indianapolis

iTrader: (0)

Garage List
so... did you email Terry?
__________________
07 E92 335I | JB4 G5 ISO | BMS E85 Flash | DCI | BMS DPs | Helix FMIC | Alpina TCU Flash | Walbro GLS392 | E70 | 429rwhp/474rwtq
|


Appreciate 0
      03-18-2013, 10:30 PM   #3
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

Quote:
Originally Posted by AWil335i
so... did you email Terry?
Not yet I'm trying to see if other N54 guys have had this issue before I email him. That and I don't have a recorded log yet since I work like a slave. But what are your thoughts?
Appreciate 0
      03-19-2013, 08:17 AM   #4
Mike@N54Tuning.com
Joint Chiefs of Staff
Canada
4920
Rep
115,999
Posts

Drives: 2007 335i, 2015 M3
Join Date: Dec 2008
Location: N54tuning.com

iTrader: (89)

Since this is happening without the JB4 as well just dealer it, no? Assuming you have warranty of course.

Mike
Appreciate 0
      03-19-2013, 09:32 AM   #5
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

Quote:
Originally Posted by Mike@N54Tuning.com
Since this is happening without the JB4 as well just dealer it, no? Assuming you have warranty of course.

Mike
Hahaha warranty? What's that? My car is full bolt on running E85 I don't think dealership will like my car as soon as the hear me pull up. I'm just trying to see what people think. I have already emailed Terry just waiting for his input. I'm thinking the culprit is either the boost solenoid or the MAP sensor.

Thoughts anyone?
Appreciate 0
      03-19-2013, 09:46 AM   #6
2jzn54
Captain
41
Rep
823
Posts

Drives: 07 E90 335i 6MT
Join Date: Jul 2011
Location: United States

iTrader: (6)

if its happening with the JB4 off its not the JB4.. Remove the JB4 completely and see how it goes... If you are experiencing the same issue you have a separate software/hardware problem, which will probably require a dealer/indy visit.

If you have a warranty left on the car or rather CPO i'm guessing at this point your warranty dosen't just fly out the window because you have bolt ons the problem has to be related to the bolt on. They won't test your fuel unless they suspect the issue is fuel related.
Appreciate 0
      03-19-2013, 11:19 AM   #7
BobVader
Lieutenant
BobVader's Avatar
Canada
32
Rep
414
Posts

Drives: 335xi sedan 2008
Join Date: Mar 2008
Location: Montreal, Canada

iTrader: (0)

"A"...try new selenoid...same problem two years ago..
__________________
'08 BMW 335xi // Sedan // Black Sapphire // Sports Package//Mods: JB3 2.0|Unlocked 18ohm Board|BMS Meth Kit|AA Speed Delimiter|BMS tuning gauge|UR CL DP |BMS DCI|AA Exhaust|Helix fmic|CDV|H&R coilover| 10mm Spacers H&R on 4 wheels|**Record for XI's on dragtimes.com, 11.768s@118.70**Top speed 186,4 mph GPS, vbox 60-130mph at 10.18
Appreciate 0
      03-19-2013, 05:21 PM   #8
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

Quote:
Originally Posted by BobVader
"A"...try new selenoid...same problem two years ago..
Will do, I'm gonna get under the car this weekend and check if any lines are off or if the waste gates are stuck. If all is good mechanically then I'm gonna order some new solenoids.

As for my warranty... Nope no mo. I have 107k on my car. I travel a lot lol. But instead of taking it to the dealer if rather ask people that actually work on their cars no just take it to the dealer, waste of money. Thanks for your advice though. <---- that's not sarcastic tone by the way.
Appreciate 0
      03-19-2013, 10:04 PM   #9
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

So went through the car, waste gates aren't stuck and vacuum lines are where they are suppose to be. Now I'm going to order some new solenoids.
Appreciate 0
      03-19-2013, 10:13 PM   #10
Indo Rider
Captain
555
Rep
739
Posts

Drives: 135
Join Date: Apr 2012
Location: United States

iTrader: (0)

If you posted a log of the event it might help, but the boost control solenoids is a decent guess, especially at 107K. I replaced mine recently at about 55K and they were definitely not functioning nominally based on some testing I did with the mighty vac.
Appreciate 0
      03-20-2013, 03:53 AM   #11
EASTCOASTNINJA
WILL
EASTCOASTNINJA's Avatar
United_States
30
Rep
496
Posts

Drives: 2008 Alpine White 335i Sedan
Join Date: Jan 2012
Location: Fayetteville, NC

iTrader: (1)

Quote:
Originally Posted by Indo Rider
If you posted a log of the event it might help, but the boost control solenoids is a decent guess, especially at 107K. I replaced mine recently at about 55K and they were definitely not functioning nominally based on some testing I did with the mighty vac.
Yea sorry haven't been able to do a log, work is crazy and I have to jump on good ole 95 to do one. My solenoids were farting before and now no more. So im gonna buy some.
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:04 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST