[shravangupta]

does anyone know where to buy the bottom black part shown in this picture, between the exhaust pipes but in carbon fiber?

http://www.cargym.com/images/BM92024A_5.jpg

also maybe CF covers for the 3 black strips if they're available too?

Im adding a CF performance CRT (paintmatched) spoiler and I think the CF pieces would go well with it. Opinions? too much CF? Car is VMR

[1QuikWS6]

BMW has an OEM CF finned center section for that diffuser - but only for E90

JL Motoring (forum vendor) has aftermarket cf finned center section like what you're looking for:

http://www.jl-motoring.com/BMW_E92_3...p/bmdi9214.htm

-OR-

You could go with their aftermarket full cf diffuser (they have single/dual/quad versions), & paint only portions of it to get the look you want that would leave cf on both finned center section and the inserts:

http://www.jl-motoring.com/BMW_E92_M...p/bmdi9213.htm

http://www.jl-motoring.com/BMW_E92_E...p/bmdi9212.htm

-OR-

They also have the standard style cf full diffuser in single/dual/quad versions (different than the performance/iS Sport diffuser you show):

http://www.jl-motoring.com/BMW_Carbo...p/bmdi9203.htm

Don't know what the fitment is like on any of those though - I've heard of fitment problems with some of their products on the forum...



Personally, I went with the BMW OEM iS Sport Diffuser (like one in your pic), left the finned center section in as-received matte black, but did custom cf inserts for the center section & the (2) end inserts. No one has these available that I have found.

I simply bought thin, adhesive backed real cf sheet from here:

http://dragonplate.com/ecart/categories.asp?cID=65

Made cardboard templates of the OEM inserts, cut them out of the cf sheet, & applied.

[shravangupta]

super delayed here but do you have pictures of the cut outs you made? and how they look applied to the car?