0-60 MPH with PROCEDE?

the_stranger · 10-22-2007, 06:51 PM

Does anybody know what the 0-60 MPH time on the 335i is when you PROCEDE it? I know the stock can get there in 4.8 secs. What it the hp increase we get?

!Xoible · 10-22-2007, 06:52 PM

wow, how many people are going to tell u

siriusinvestor · 10-22-2007, 06:55 PM

You can get SUPER-PROCEDE and get knot to 60 in 4.0 flat. I'll admit SUPER-PROCEDE is in it's prototype stages though. Plus i'll bet visnhu will not admit there is even a SUPER-PROCEDE. They are keeping it very secretive.

///AFRO · 10-22-2007, 06:58 PM

Quote:

Originally Posted by siriusinvestor

You can get SUPER-PROCEDE and get knot to 60 in 4.0 flat. I'll admit SUPER-PROCEDE is in it's prototype stages though. Plus i'll bet visnhu will not admit there is even a SUPER-PROCEDE. They are keeping it very secretive.

LMAO, are you serius ?

///AFRO · 10-22-2007, 06:59 PM

Quote:

Originally Posted by the_stranger

Does anybody know what the 0-60 MPH time on the 335i is when you PROCEDE it? I know the stock can get there in 4.8 secs. What it the hp increase we get?

With stock tires and rims, with a good driver. You looking at 4.5-4.6 seconds

sflgator · 10-22-2007, 07:09 PM

Everyone will tell you to

but I'll save you a few minutes of your time; expect ~ 4.5x-4.6x sec. with PROcede v1.47 and ~ 4.2x-4.4x sec. w/ PROcede v2.0. Here's a pic of my 0-60mph run (during a timed 1/4 mi. run) w/ v2.0...

Diesel · 10-22-2007, 07:15 PM

where can i get that performance timer/accelerometer? i have a 330i

sflgator · 10-22-2007, 07:19 PM

Quote:

Originally Posted by Diesel

where can i get that performance timer/accelerometer? i have a 330i

Online. Either the Beltronics, the Uniden, or the G-Tech.

Year's_End · 10-22-2007, 07:37 PM

Which would you prefer?

///AFRO · 10-22-2007, 07:44 PM

Quote:

Originally Posted by Bimmer Loyalist

Which would you prefer?

G-tech. Most people would prefer them

sflgator · 10-22-2007, 07:45 PM

Quote:

Originally Posted by Bimmer Loyalist

Which would you prefer?

I would say either the G-Tech or the Beltronics; apparently, the Beltronics FX1 (which they may not make any more,,,I think they just offer the FX2 which is the same but hooks up to your PC via USB for graphing and printouts, etc.) and Uniden accelerometer are the same unit though.

SteveMD · 10-22-2007, 08:20 PM

Knot to 60?

Sniz · 10-22-2007, 09:45 PM

I'm typically 4.4 to 4.45 to 60 w/ my only mod being V1.47 procede. My car is a manual too w/ stock RFT for now....though I know I will be able to improve my launch w/ some stickier/wider tires. I have yet to break the 2 second mark on my 60 ft times w/ the Gtech or at the track. 60 ft is killing me.

This is according to my GtechRR

Jonmartin · 10-22-2007, 10:02 PM

Quote:

Originally Posted by SteveMD

Knot to 60?

Guess you've never seen Top Gear.

vbmw335 · 10-22-2007, 10:40 PM

My buddy chitown335i got a 4.14 on Gtech runs. His car is a sedan/AT with nitto drag radials and V 1.47. we did a number of runs and they are mostly in the range of 4.2 - 4.4. That is with a passenger (170 lbs) ,driver (190 lbs).

His car might be a factory freak...but its repeatedly proven itself on the drag strip and gtech. Drag times are 12.8 @ 108 ,80f+.

the_stranger · 10-23-2007, 12:29 AM

thanks a lot for your responses guys. it really helped.

horsedjump · 10-23-2007, 01:55 AM

Quote:

Originally Posted by SteveMD

Knot to 60?

Naught me.

siriusinvestor · 10-23-2007, 11:48 AM

Quote:

Originally Posted by ///AFRO

LMAO, are you serius ?

Hell no, just trying to throw off the OP so he will use the damn search button. haha

purplewidow · 10-23-2007, 12:16 PM

every 100lb's added is roughly .1 sec added your 0-60 time it almost doubles for the 1/4

AndreTheGeek · 10-23-2007, 08:03 PM

Quote:

Originally Posted by SteveMD

Knot to 60?

I think he means naught to 60.

sambonator · 10-23-2007, 10:24 PM

Quote:

Originally Posted by siriusinvestor

You can get SUPER-PROCEDE and get knot to 60 in 4.0 flat. I'll admit SUPER-PROCEDE is in it's prototype stages though. Plus i'll bet visnhu will not admit there is even a SUPER-PROCEDE. They are keeping it very secretive.

Quote:

Originally Posted by ///AFRO

LMAO, are you serius ?

No, he is Sirius.

Carnage · 10-23-2007, 10:50 PM

Quote:

Originally Posted by vbmw335

My buddy chitown335i got a 4.14 on Gtech runs. His car is a sedan/AT with nitto drag radials and V 1.47. we did a number of runs and they are mostly in the range of 4.2 - 4.4. That is with a passenger (170 lbs) ,driver (190 lbs).

His car might be a factory freak...but its repeatedly proven itself on the drag strip and gtech. Drag times are 12.8 @ 108 ,80f+.

He produced a time sheet for the 12.8 and it's a great time but that time in the 1/4 doesn't seem to translate to a 0-60 @ 4.1. Case in point, the M5 runs a 0-60 @ 4.3.- 4.4 with a 1/4 @ ~ 12.6 and the 08' Vette runs a 0-60 @ 4.0 and a 1/4 @ ~12.4.

Since alot of cars running a 4.1-4.2 0-60 seem to run the 1/4 @ 12.4.-12.5, unless the 335 with Procede really bongs down between 60 and 110 (which I doubt), a 4.4-4.5 0-60 is probably more realistic and that's pretty damn good.

10-22-2007, 06:51 PM	#1
the_stranger Captain 37 Rep 926 Posts Drives: e92 M3 6MT Join Date: Aug 2007 Location: India iTrader: (1) Garage List 2009 BMW M3 Coupe [0.00]	0-60 MPH with PROCEDE? Does anybody know what the 0-60 MPH time on the 335i is when you PROCEDE it? I know the stock can get there in 4.8 secs. What it the hp increase we get? __________________ 2008 e92 M3 6MT AW/BLACK (SOLD) 2009 e92 M3 6MT AW/FR
	Appreciate 0 Tweet Quote

10-22-2007, 06:52 PM	#2
!Xoible Banned 837 Rep 46,029 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	wow, how many people are going to tell u
	Appreciate 0 Quote

10-22-2007, 06:55 PM	#3
siriusinvestor Captain 67 Rep 873 Posts Drives: 1989 Ugo Join Date: Apr 2005 Location: US iTrader: (2)	You can get SUPER-PROCEDE and get knot to 60 in 4.0 flat. I'll admit SUPER-PROCEDE is in it's prototype stages though. Plus i'll bet visnhu will not admit there is even a SUPER-PROCEDE. They are keeping it very secretive.
	Appreciate 0 Quote

10-22-2007, 07:09 PM	#6
sflgator Major General 148 Rep 5,389 Posts Drives: '09 MB C63 AMG & '08 MB GL450 Join Date: Oct 2006 Location: U.S. iTrader: (1)	Everyone will tell you to but I'll save you a few minutes of your time; expect ~ 4.5x-4.6x sec. with PROcede v1.47 and ~ 4.2x-4.4x sec. w/ PROcede v2.0. Here's a pic of my 0-60mph run (during a timed 1/4 mi. run) w/ v2.0... Attached Images __________________ \|2009 RENNtech MB C63 AMG \| Black/Black Leather/Black Maple \| Premium II \| MultiMedia \| iPod \| \| TeleAid \| Charcoal Filter Delete \| BMC High-Flow Air Filters \| High-Flow Secondary Cats \| Clear Side Markers \|
	Appreciate 0 Quote

10-22-2007, 07:15 PM	#7
Diesel Private First Class 18 Rep 146 Posts Drives: 330i E90 Join Date: Mar 2007 Location: NJ iTrader: (0)	where can i get that performance timer/accelerometer? i have a 330i
	Appreciate 0 Quote

10-22-2007, 07:37 PM	#9
Year's_End Lieutenant General 1147 Rep 12,445 Posts Drives: 2020 Shelby GT350 Join Date: Feb 2007 Location: FL iTrader: (0)	Which would you prefer? __________________ Past: '08 E92 335i\|ZPP\|ZSP\|6AT Past: '15 Mustang GT\|401A\|PP\|6MT Current: '20 Shelby GT350\|6MT
	Appreciate 0 Quote

10-22-2007, 08:20 PM	#12
SteveMD Colonel 198 Rep 2,485 Posts Drives: 2016 F10 535i MSport Join Date: Dec 2005 Location: Raventown! iTrader: (3)	Knot to 60? __________________ 2006 E90 330i (retired) 2009 E90 335i (retired) 2012 E70 X5 50i M Sport (retired) 2016 F10 535i M Sport
	Appreciate 0 Quote

10-22-2007, 09:45 PM	#13
Sniz Lieutenant General 658 Rep 10,587 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	I'm typically 4.4 to 4.45 to 60 w/ my only mod being V1.47 procede. My car is a manual too w/ stock RFT for now....though I know I will be able to improve my launch w/ some stickier/wider tires. I have yet to break the 2 second mark on my 60 ft times w/ the Gtech or at the track. 60 ft is killing me. This is according to my GtechRR __________________
	Appreciate 0 Quote

10-22-2007, 10:40 PM	#15
vbmw335 Second Lieutenant 19 Rep 263 Posts Drives: BMW 335i Coupe Join Date: Oct 2006 Location: on the moon iTrader: (0)	My buddy chitown335i got a 4.14 on Gtech runs. His car is a sedan/AT with nitto drag radials and V 1.47. we did a number of runs and they are mostly in the range of 4.2 - 4.4. That is with a passenger (170 lbs) ,driver (190 lbs). His car might be a factory freak...but its repeatedly proven itself on the drag strip and gtech. Drag times are 12.8 @ 108 ,80f+. __________________ 335i coupe Procede 700 HP EPL Tuned Porsche 911 Turbo E46 M3 SMG BMW X5 4.8 is
	Appreciate 0 Quote

10-23-2007, 12:29 AM	#16
the_stranger Captain 37 Rep 926 Posts Drives: e92 M3 6MT Join Date: Aug 2007 Location: India iTrader: (1) Garage List 2009 BMW M3 Coupe [0.00]	thanks a lot for your responses guys. it really helped. __________________ 2008 e92 M3 6MT AW/BLACK (SOLD) 2009 e92 M3 6MT AW/FR
	Appreciate 0 Quote

10-23-2007, 12:16 PM	#19
purplewidow Lieutenant Colonel 51 Rep 1,928 Posts Drives: e92 335 Join Date: Feb 2007 Location: Chicago iTrader: (2)	every 100lb's added is roughly .1 sec added your 0-60 time it almost doubles for the 1/4
	Appreciate 0 Quote