330/325 Exhaust Hangers/Mount

Alex.J · 02-23-2014, 04:05 PM

Hi there guys,

Can somebody please help me, I have a 320d, I put a BCS back box on but now fancy a change and have a oem genuine 330d back box to keep my car looking oem!

This back box has '2' hangers on it, one on the left(which my car has) and one on right, which my car doesn't have!

Now, this mount, can it be purchased seperately and attached?! How does it attach?! Anybody got one?! Is it a bumper off job?!

Thank you

Icekube · 02-24-2014, 03:13 AM

I got an exhaust shop to fit my system along with a de-cat pipe, so not sure what they done for that mount, I recall them making up a bracket at bolting it onto the 330D mount location. if the weather improves any, ill crawl under and snap a pic.

there is also another "mount" on the left front of the backbox, which seams to want to be bolted to the subframe, although mine isn't in use.

Alex.J · 02-24-2014, 10:49 AM

Quote:

Originally Posted by Icekube

I got an exhaust shop to fit my system along with a de-cat pipe, so not sure what they done for that mount, I recall them making up a bracket at bolting it onto the 330D mount location. if the weather improves any, ill crawl under and snap a pic.

there is also another "mount" on the left front of the backbox, which seams to want to be bolted to the subframe, although mine isn't in use.

Thanks for that mate I really appreciate that!

A photo would be good!

Also anybody who has a standard 330 etc if they could snap me one too for comparison!

Thanks mate, I'll pm you back now too, totally forgot I needed to reply!

Ta

Alex.J · 02-25-2014, 05:07 AM

bump! anybody else got an image?

gaza01 · 03-01-2014, 02:06 PM

Not sure if this helps. Its a petrol back box for a 325/330 but shows the mounts. They are all welded onto the back box.
I changed mine without taking the bumper off but you will need to jack up the rear on that side slightly.

Alex.J · 03-06-2014, 02:44 PM

All sorted!

Just needed an extra hanger and rubber!

New exhaust fitted !

Scoff123 · 03-17-2014, 08:20 AM

Hi Alex, do you have any pics of this fitted yet by any chance? I think I'd like to do the same rather than get a 'near enough' OEM look by getting a generic twin round tip welded onto my existing standard backbox. Is your car under AUC warranty and if so, has this affected your warranty? How much of the 330D exhaust did you fit, was it literally just the rear box or more of the pipework going forward as well?
Thanks
Scott

Alex.J · 03-17-2014, 09:35 AM

Quote:

Originally Posted by Scoff123

Hi Alex, do you have any pics of this fitted yet by any chance? I think I'd like to do the same rather than get a 'near enough' OEM look by getting a generic twin round tip welded onto my existing standard backbox. Is your car under AUC warranty and if so, has this affected your warranty? How much of the 330D exhaust did you fit, was it literally just the rear box or more of the pipework going forward as well?
Thanks
Scott

Hi mate,

Received you PM and not had time to respond properly!

Will update this and PM you later on and answer your questions !

Thanks

Scoff123 · 03-17-2014, 09:40 AM

Hi Alex, brilliant, thanks very much! Sorry didn't want to look like I was stalking you, just didn't know if PM had worked as some forums you need so many posts before you are allowed to PM etc. Appreciate your reply and look forward to the update!
Cheers
Scott

richk84 · 03-22-2014, 11:01 AM

Did you just fit the backbox Alex? thinking of doing this to my car too.

02-23-2014, 04:05 PM	#1
Alex.J Major 56 Rep 1,241 Posts Drives: BMW E92 335i MSport Join Date: May 2013 Location: Nottingham iTrader: (9)	330/325 Exhaust Hangers/Mount Hi there guys, Can somebody please help me, I have a 320d, I put a BCS back box on but now fancy a change and have a oem genuine 330d back box to keep my car looking oem! This back box has '2' hangers on it, one on the left(which my car has) and one on right, which my car doesn't have! Now, this mount, can it be purchased seperately and attached?! How does it attach?! Anybody got one?! Is it a bumper off job?! Thank you __________________
	Appreciate 0 Tweet Quote

02-24-2014, 03:13 AM	#2
Icekube Captain 46 Rep 891 Posts Drives: E87 130i Join Date: May 2013 Location: Livingston iTrader: (3)	I got an exhaust shop to fit my system along with a de-cat pipe, so not sure what they done for that mount, I recall them making up a bracket at bolting it onto the 330D mount location. if the weather improves any, ill crawl under and snap a pic. there is also another "mount" on the left front of the backbox, which seams to want to be bolted to the subframe, although mine isn't in use.
	Appreciate 0 Quote

02-25-2014, 05:07 AM	#4
Alex.J Major 56 Rep 1,241 Posts Drives: BMW E92 335i MSport Join Date: May 2013 Location: Nottingham iTrader: (9)	bump! anybody else got an image? __________________
	Appreciate 0 Quote

03-01-2014, 02:06 PM	#5
gaza01 Colonel 105 Rep 2,692 Posts Drives: E92 335i Join Date: Dec 2010 Location: London iTrader: (3)	Not sure if this helps. Its a petrol back box for a 325/330 but shows the mounts. They are all welded onto the back box. I changed mine without taking the bumper off but you will need to jack up the rear on that side slightly. Attached Images
	Appreciate 0 Quote

03-06-2014, 02:44 PM	#6
Alex.J Major 56 Rep 1,241 Posts Drives: BMW E92 335i MSport Join Date: May 2013 Location: Nottingham iTrader: (9)	All sorted! Just needed an extra hanger and rubber! New exhaust fitted ! __________________
	Appreciate 0 Quote

03-17-2014, 08:20 AM	#7
Scoff123 Private First Class 17 Rep 194 Posts Drives: E90 LCI 320D M Sport Join Date: Feb 2014 Location: East Devon iTrader: (0)	Hi Alex, do you have any pics of this fitted yet by any chance? I think I'd like to do the same rather than get a 'near enough' OEM look by getting a generic twin round tip welded onto my existing standard backbox. Is your car under AUC warranty and if so, has this affected your warranty? How much of the 330D exhaust did you fit, was it literally just the rear box or more of the pipework going forward as well? Thanks Scott
	Appreciate 0 Quote

03-17-2014, 09:40 AM	#9
Scoff123 Private First Class 17 Rep 194 Posts Drives: E90 LCI 320D M Sport Join Date: Feb 2014 Location: East Devon iTrader: (0)	Hi Alex, brilliant, thanks very much! Sorry didn't want to look like I was stalking you, just didn't know if PM had worked as some forums you need so many posts before you are allowed to PM etc. Appreciate your reply and look forward to the update! Cheers Scott
	Appreciate 0 Quote

03-22-2014, 11:01 AM	#10
richk84 Lieutenant Colonel 130 Rep 1,534 Posts Drives: e93 330i Join Date: Oct 2012 Location: All over iTrader: (0)	Did you just fit the backbox Alex? thinking of doing this to my car too.
	Appreciate 0 Quote