[XM_Rocks]

When I got my car both lenses were a slight haze.

So I used the 3M kit with a drill attachment.

I got about half of the haze off however it looks like the inside of the lenses are hazy on both.

Anyone ever see this?

I have never seen any condensation inside the lenses and the outside is smooth post 3M treatment.

Do I need to remove lenses and try the 3M on the inside?

[Elliott@DetailAddict]

You can try and polish the inside first. It might be better to replace the lens with a new OEM one. A new lens will cost more but the look of it will be better than polishing it. Hope this helps.

-Elliott

[tc535i]

are the lenses easily replaceable like my e46 is? I was under the impression that you had to bake these to take the lens off

[Elliott@DetailAddict]

Originally Posted by tc535i

are the lenses easily replaceable like my e46 is? I was under the impression that you had to bake these to take the lens off

Not sure about if it's as easy. You just have to heat up the adhesive to remove the lens. I usually use a heat gun but baking it would work just fine.

[XM_Rocks]

Elliott,

Thanks for the response!

Unlike the E46 I was under the impression that you cant buy replacement lenses for the E90.

If anyone knows of any please let me know.

I will open these up in the next few weeks and try the polish on the inside.

[BashShah]

I have the Same Problem,
Got a cheap Halogen Headlight from ebay for 65.
Tabs and some other stuff broken, but the Outer Lense Cover is PERFECT conditions with 0 road rash damage.

I will be opening my head light but practice on the Halogen first.
Tried to look for covers only, but no one is selling them.

DN

[XM_Rocks]

Originally Posted by DarkNemesis

I have the Same Problem,
Got a cheap Halogen Headlight from ebay for 65.
Tabs and some other stuff broken, but the Outer Lense Cover is PERFECT conditions with 0 road rash damage.

I will be opening my head light but practice on the Halogen first.
Tried to look for covers only, but no one is selling them.

DN

I was thinking the same think.

Let me know if you run into any fitment issues.

[XM_Rocks]

Originally Posted by DarkNemesis

I have the Same Problem,
Got a cheap Halogen Headlight from ebay for 65.
Tabs and some other stuff broken, but the Outer Lense Cover is PERFECT conditions with 0 road rash damage.

I will be opening my head light but practice on the Halogen first.
Tried to look for covers only, but no one is selling them.

DN

Did you ever attempt this?

[BashShah]

Not yet, Man Time is against me...BUT the Good News, Wife is leaving with Kids for a Month.
Damn am going to get a lot done....LOL
She leaves Aug 1st.
Patience Brother....Patience.

DN

[XM_Rocks]

Originally Posted by DarkNemesis

Not yet, Man Time is against me...BUT the Good News, Wife is leaving with Kids for a Month.
Damn am going to get a lot done....LOL
She leaves Aug 1st.
Patience Brother....Patience.

DN

lol.

I am least productive when my wife leaves town.

Out for a long hike to wipe out the dogs then Battlefield 4 with friends... rinse lather repeat.

[Taruno]

Battlefield 4 !!!!!!

But on topic this really seems like a burn coating on the outer lens man and if so it can be polished and resealed.

[XM_Rocks]

Originally Posted by Taruno

Battlefield 4 !!!!!!

But on topic this really seems like a burn coating on the outer lens man and if so it can be polished and resealed.

I have tried my best with the 3M kit and drill adapter.

I cleaned them up quite a bit but not all the way.

I might pony up to see if a pro can do a better job on the outside before I go to the trouble of removing the lenses.

OT: Are you on PS4 with BF4?

[Taruno]

OT: nah PC master race