JL XD600/6 trunk mount options

Narcosis · 05-26-2014, 10:07 AM

I'm scoping out my system upgrade, and am looking for options on mounting my XD600/6. My car has the base stereo upgrade - no OEM amps.

There's a location next to the TCU where the amp fits well. Might anyone know what's on the other side of that sheet metal? If I drill there will I end up piercing the fuel tank? A concern for this location is airflow.

I could fabricate a mounting plate and secure it to the brackets already there, but my fab skills leave a lot to be desired. I want stealth

Thanks in advance.

ctuna · 05-26-2014, 10:54 AM

Why not put in the stock amp position?
Like most people do . Its out of sight and vented.

e90bmw328i · 05-26-2014, 11:16 PM

Quote:

Originally Posted by ctuna

Why not put in the stock amp position?
Like most people do . Its out of sight and vented.

+1

Don't drill holes in the metal. You might compromise the integrity of the frame. Keep the amp in the same place as stock amp.

Narcosis · 05-28-2014, 07:16 AM

Thanks guys. When I pulled up the left hand storage bin there didn't appear to be any room under it. I need to remove all of the trunk trim to check it out.

Technic · 05-28-2014, 09:37 AM

Quote:

Originally Posted by Narcosis

I'm scoping out my system upgrade, and am looking for options on mounting my XD600/6. My car has the base stereo upgrade - no OEM amps.

There's a location next to the TCU where the amp fits well. Might anyone know what's on the other side of that sheet metal? If I drill there will I end up piercing the fuel tank? A concern for this location is airflow.

I could fabricate a mounting plate and secure it to the brackets already there, but my fab skills leave a lot to be desired. I want stealth

Thanks in advance.

That location is OK... just use Velcro.

tdgesq · 05-28-2014, 01:50 PM

A number of people place their amp in that location when they don't have room in the OEM compartment. If you're paranoid about adequate ventilation (like me), buy a $4 fan from Parts Express.

Narcosis · 06-11-2014, 11:32 AM

The OEM amp location didn't leave enough room due to the depth of the CD bin. I was able to source a flat panel replacement for the bin (BMW part # 51477139049).

In this image ( http://www.oemautopartsplus.com/cata...3/vid/21958532 ) my car came with part #11, it's being replaced with part #12. $9.31 plus shipping from getbmwparts.com.

I'm waiting on some installation bits and pieces to show up, once they do I'll get the install done.

My list:

OEM Headunit
JL Cleansweep
JL SES
JL XD600/6
Focal 100KRS components
Earthquake SWS-8's, 4 ohm version
Technic 2/4 harness

I've got an E92, the HU will power the rear OEM drivers. 2 channels of the XD600 will drive the Focals, and the SWS-8's will each get a pair of bridged channels.

If the SWS-8's don't provide enough bottom end, I've got a JL 10W3-D4 sub in a sealed box and my old reliable SoundStream Class A 6.0 to drive it sitting on a shelf in the garage.

Has anyone fabricated a mounting plate for the XD600 in the OEM location? If so, please share what you did.

mathematics · 06-11-2014, 12:39 PM

Yeah, went through that a few weeks ago with a customer's car. He had the deeper tray and we didn't realize it until after the amp was mounted there. Problem was solved with the flat tray.

cdgatti · 06-11-2014, 12:40 PM

I cut a piece of mdf to approximately the shape of the amp area floor and drilled 2 holes for the bolts that hold down the stock metal amp rack. Screwed amp to the board and bolted the board to the car. I used some little rubber nubbies on the other side of the board to make it more level and not rock on the bolting points.

bmw325i · 06-11-2014, 09:35 PM

Quote:

Originally Posted by cdgatti

I cut a piece of mdf to approximately the shape of the amp area floor and drilled 2 holes for the bolts that hold down the stock metal amp rack. Screwed amp to the board and bolted the board to the car. I used some little rubber nubbies on the other side of the board to make it more level and not rock on the bolting points.

I did the same but I used particle board since it is harder to strip when screwing into it. I used wood glue to attach a strip of particle board on the other side so it is level.

Narcosis · 06-15-2014, 03:31 PM

I've started a mock up, and due to saying "take whatever you need from the garage" to my 24 yr old son, I have zero metric bolts in the chest. Might someone know offhand what size the bolts are which hold the OEM amp mount bracket in place?

edit: a swag at home depot was correct, m5-.8.

05-26-2014, 10:07 AM	#1
Narcosis The dude abides 50 Rep 265 Posts Drives: 2016 F82 Join Date: Jun 2013 Location: Wisconsin iTrader: (2)	JL XD600/6 trunk mount options I'm scoping out my system upgrade, and am looking for options on mounting my XD600/6. My car has the base stereo upgrade - no OEM amps. There's a location next to the TCU where the amp fits well. Might anyone know what's on the other side of that sheet metal? If I drill there will I end up piercing the fuel tank? A concern for this location is airflow. I could fabricate a mounting plate and secure it to the brackets already there, but my fab skills leave a lot to be desired. I want stealth Thanks in advance. Attached Images
	Appreciate 0 Tweet Quote

05-26-2014, 10:54 AM	#2
ctuna Lieutenant General 1918 Rep 13,117 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Why not put in the stock amp position? Why not put in the stock amp position? Like most people do . Its out of sight and vented. Attached Images
	Appreciate 0 Quote

05-28-2014, 07:16 AM	#4
Narcosis The dude abides 50 Rep 265 Posts Drives: 2016 F82 Join Date: Jun 2013 Location: Wisconsin iTrader: (2)	Thanks guys. When I pulled up the left hand storage bin there didn't appear to be any room under it. I need to remove all of the trunk trim to check it out.
	Appreciate 0 Quote

05-28-2014, 01:50 PM	#6
tdgesq Private First Class 4 Rep 145 Posts Drives: 335xi Join Date: Feb 2012 Location: Pacific N.W. iTrader: (0)	A number of people place their amp in that location when they don't have room in the OEM compartment. If you're paranoid about adequate ventilation (like me), buy a $4 fan from Parts Express.
	Appreciate 0 Quote

06-11-2014, 11:32 AM	#7
Narcosis The dude abides 50 Rep 265 Posts Drives: 2016 F82 Join Date: Jun 2013 Location: Wisconsin iTrader: (2)	The OEM amp location didn't leave enough room due to the depth of the CD bin. I was able to source a flat panel replacement for the bin (BMW part # 51477139049). In this image ( http://www.oemautopartsplus.com/cata...3/vid/21958532 ) my car came with part #11, it's being replaced with part #12. $9.31 plus shipping from getbmwparts.com. I'm waiting on some installation bits and pieces to show up, once they do I'll get the install done. My list: OEM Headunit JL Cleansweep JL SES JL XD600/6 Focal 100KRS components Earthquake SWS-8's, 4 ohm version Technic 2/4 harness I've got an E92, the HU will power the rear OEM drivers. 2 channels of the XD600 will drive the Focals, and the SWS-8's will each get a pair of bridged channels. If the SWS-8's don't provide enough bottom end, I've got a JL 10W3-D4 sub in a sealed box and my old reliable SoundStream Class A 6.0 to drive it sitting on a shelf in the garage. Has anyone fabricated a mounting plate for the XD600 in the OEM location? If so, please share what you did.
	Appreciate 0 Quote

06-11-2014, 12:39 PM	#8
mathematics Captain 69 Rep 994 Posts Drives: 08 328i e93 alpine white Join Date: May 2009 Location: Queens, NY iTrader: (0)	Yeah, went through that a few weeks ago with a customer's car. He had the deeper tray and we didn't realize it until after the amp was mounted there. Problem was solved with the flat tray. __________________ iPhone 6 Plus (iTunes library/iTunes radio/Waze, etc) to Airport Express via AirPlay. Toslink out of Airport Express to Helix P-Six DSP. PHD AF 1.C tweeters, PHD FB 4.1 midranges. Jehnert Door Cards and mid-bass'.
	Appreciate 0 Quote

06-11-2014, 12:40 PM	#9
cdgatti Colonel 255 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	I cut a piece of mdf to approximately the shape of the amp area floor and drilled 2 holes for the bolts that hold down the stock metal amp rack. Screwed amp to the board and bolted the board to the car. I used some little rubber nubbies on the other side of the board to make it more level and not rock on the bolting points.
	Appreciate 0 Quote

06-15-2014, 03:31 PM	#11
Narcosis The dude abides 50 Rep 265 Posts Drives: 2016 F82 Join Date: Jun 2013 Location: Wisconsin iTrader: (2)	I've started a mock up, and due to saying "take whatever you need from the garage" to my 24 yr old son, I have zero metric bolts in the chest. Might someone know offhand what size the bolts are which hold the OEM amp mount bracket in place? edit: a swag at home depot was correct, m5-.8. Last edited by Narcosis; 06-15-2014 at 05:07 PM..
	Appreciate 0 Quote