Sponsored by The Tire Rack

[Game]

I searched and haven't seen many discussions on lug bolts for aftermarket wheels. Not interested in a stud conversion at the moment.

So what do you guys recommend? (only interested in black)



Found some FK extended lug bolts that seem promising. Although unsure which mm shank to go with.

http://www.esetuning.com/FK-Automoti...a35-znnitt.htm

[VMRWheels]

http://otisincla.com/index.php?route...roduct_id=1165

[Game]

Originally Posted by VMRWheels

http://otisincla.com/index.php?route...roduct_id=1165

Thank you! You recommend a 26mm shank on aftermarket wheels?

[#Tee]

type of wheel done matter in this case, its when you decide to put a spacer on they wont be long enough to compensate...thats what she told me.

26mm is oem length

[VMRWheels]

Originally Posted by Game

Thank you! You recommend a 26mm shank on aftermarket wheels?

Assuming you're not using spacers, that is the size of an OEM bolt, and most wheels would have a similar depth as far as the seat goes to your factory wheels. Therefore, you don't want to use longer or shorter bolts, unless the manufacturer of the wheels specifies this, or you are using spacers.

[Game]

Originally Posted by VMRWheels

Assuming you're not using spacers, that is the size of an OEM bolt, and most wheels would have a similar depth as far as the seat goes to your factory wheels. Therefore, you don't want to use longer or shorter bolts, unless the manufacturer of the wheels specifies this, or you are using spacers.

Originally Posted by #Tee

type of wheel done matter in this case, its when you decide to put a spacer on they wont be long enough to compensate...thats what she told me.

26mm is oem length

Thanks guys. No spacers and the OEM ones fit fine so I'll go with the 26mm.