Emissions test, NO CEL, no DPfix

11SEC · 06-18-2014, 10:20 AM

So I have to do an emissions test soon and I was curious if I even need to re-install my DPfix because I don't have any CELs on my dash and I don't have auto-code clear enabled.

Thoughts?

MDORPHN · 06-18-2014, 10:38 AM

Quote:

Originally Posted by 11SEC

So I have to do an emissions test soon and I was curious if I even need to re-install my DPfix because I don't have any CELs on my dash and I don't have auto-code clear enabled.

Thoughts?

DFfix is not used to prevent CELs; it's used for purposes of OBDII "readiness."

Don't know what type of emissions testing is done in your jurisdiction, but you may not pass if they scan your OBDII and check for readiness.

Neil

Miller335 · 06-18-2014, 01:34 PM

Quote:

Originally Posted by MDORPHN

DFfix is not used to prevent CELs; it's used for purposes of OBDII "readiness."

Don't know what type of emissions testing is done in your jurisdiction, but you may not pass if they scan your OBDII and check for readiness.

Neil

I would assume all check for readiness.
Otherwise people would just pull the negative terminal and pass.

MDORPHN · 06-18-2014, 01:55 PM

Quote:

Originally Posted by Miller335

I would assume all check for readiness.
Otherwise people would just pull the negative terminal and pass.

Actually, quite a few jurisdictions still do a sniffer test.

Neil

mike@x-ph.com · 06-18-2014, 01:59 PM

You still would not pass

shadow191 · 06-18-2014, 02:27 PM

The codes will come back. You can drive for a little while before monitors set. Once they set, the codes will come back. If you go before the monitors set, you'll fail for readiness.

11SEC · 06-18-2014, 02:30 PM

I've been driving for almost a year without the DPfix and codes haven't came back since.

Is there maybe something in the bms backend flash that disables codes for that?

V8bait · 06-18-2014, 02:53 PM

Backend flash disables the code. Most jurisdictions allow one monitor to be not ready. I passed like this.

Alucard335iA · 06-18-2014, 05:06 PM

In Germany People Flash where Codes are enabled, but before that they drive the Car "hot" the only reason why you get Codes is the cold Start. When cat are warm, You will get readiness. Of Course you can not Drive to Emission test and Let it become cold again.

06-18-2014, 10:20 AM	#1
11SEC Banned 5 Rep 254 Posts Drives: E92 335i Join Date: May 2014 Location: Canada iTrader: (0)	Emissions test, NO CEL, no DPfix So I have to do an emissions test soon and I was curious if I even need to re-install my DPfix because I don't have any CELs on my dash and I don't have auto-code clear enabled. Thoughts?
	Appreciate 0 Tweet Quote

06-18-2014, 01:59 PM	#5
mike@x-ph.com BimmerPost Supporting Vendor 24201 Rep 190,807 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	You still would not pass __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

06-18-2014, 02:27 PM	#6
shadow191 Lieutenant Colonel 181 Rep 1,681 Posts Drives: 2017 Volvo XC90 R-Design Join Date: Dec 2012 Location: GA iTrader: (3)	The codes will come back. You can drive for a little while before monitors set. Once they set, the codes will come back. If you go before the monitors set, you'll fail for readiness.
	Appreciate 0 Quote

06-18-2014, 02:30 PM	#7
11SEC Banned 5 Rep 254 Posts Drives: E92 335i Join Date: May 2014 Location: Canada iTrader: (0)	I've been driving for almost a year without the DPfix and codes haven't came back since. Is there maybe something in the bms backend flash that disables codes for that?
	Appreciate 0 Quote

06-18-2014, 02:53 PM	#8
V8bait Lieutenant 406 Rep 574 Posts Drives: e92 335i 6mt Join Date: Oct 2011 Location: Houston iTrader: (1)	Backend flash disables the code. Most jurisdictions allow one monitor to be not ready. I passed like this.
	Appreciate 0 Quote

06-18-2014, 05:06 PM	#9
Alucard335iA Private 5 Rep 52 Posts Drives: E92 335iA Join Date: Apr 2012 Location: Germany iTrader: (0)	In Germany People Flash where Codes are enabled, but before that they drive the Car "hot" the only reason why you get Codes is the cold Start. When cat are warm, You will get readiness. Of Course you can not Drive to Emission test and Let it become cold again.
	Appreciate 0 Quote