BMW Garage | BMW Meets | Register | Today's Posts | Search |
09-28-2014, 02:44 PM | #1 |
Registered
1
Rep 1
Posts |
Car won't start will appreciate any help
This is my first post here hope someone can help.
Car would not start for hours then started, this went on fo 3-4 days. After many consultation., reading many posts pointed out its the starter. Replaced the starter I am getting some new codes now - car still won't start will appreciate any help. I tested the Starter. the big Red connector reads over 12 volts and the Black connector in the Back reads around 11.75 volts when push the start button. The old Starter I took out tested on the bench it does start. Battery fully charged and new battery. Battery does drains a little. Thanks Here is the code I am getting A0C1 - Terminal 50 output - Signal too low - Permanent A0C2 - Terminal 50 output - Signal too low - Permanent A0B4 - Starter motor, starter operation - Permanent A0B1 - Input gear selector - Signal missing or faulty - Intermittent |
Post Reply |
Bookmarks |
|
|