|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
03-15-2015, 03:43 PM | #1 |
Lieutenant
85
Rep 425
Posts |
FS: RS19 pads F&R, rear brass caliper guides, OEM calipers, OEM rotors
Pagid RS19 brake pads all around with 1 day at Big Willow. Looks like I barely took any pad material off during my sesh. I measured >12mm on the fronts and 11mm on the rears so they're essentially new. $375 OEM calipers, brackets, and brake lines. All seals are intact, no issues. OEM black finish (no respray). $100 New brass caliper guides for OEM rear calipers. I can install them into the rear assemblies if you're interested in purchasing them with the calipers. $55 See pic above with pads. Shipping and PP fee are buyer's responsibility. Pick up the whole lot and I'll take $50 off purchase price.
__________________
2021 ZR2 Airborne certified
2019 GTS PCCB 5x130 Slick 2016 Agate Grey GT4 PCCB LWB 2013 HP4 Competition Last edited by MVEED3; 04-04-2015 at 11:30 AM.. Reason: Rotors sold and price drop on brake pads. |
03-15-2015, 08:33 PM | #3 |
Lieutenant
85
Rep 425
Posts |
My best estimation is based on miles driven. They were installed at my final covered service just under 50k miles and I swapped them out for a BBK shy of 75k. They should hold up to street use with a fresh set of brake pads. YMMV.
__________________
2021 ZR2 Airborne certified
2019 GTS PCCB 5x130 Slick 2016 Agate Grey GT4 PCCB LWB 2013 HP4 Competition |
Appreciate
0
|
03-17-2015, 10:17 PM | #4 |
New Member
0
Rep 12
Posts |
I'm not one to bag on someone trying to off-load something they don't want but...
I myself have a full set to sell and I've done some research on them. New RS-19 pads on the front are molded to 20+mm so I question whether what you're selling really are the RS-19 model pads... Caveat emptor and all that I'd have to caution... |
Appreciate
0
|
03-17-2015, 11:44 PM | #5 | |
Lieutenant
85
Rep 425
Posts |
Quote:
Returning to the RS-19 brake pads I have in this thread, I truly believed that I provided enough info in the form of pics of the parts; measurements; and their respective packaging that I received them in which included PNs. I measured the pad material new at 13mm front and 11mm rear. I purchased them here and they only have RS19 in the E9X M3 application: http://www.m-world.us/pagid_rs14_rs1...e_pads_m3.html I hope this addresses your concern.
__________________
2021 ZR2 Airborne certified
2019 GTS PCCB 5x130 Slick 2016 Agate Grey GT4 PCCB LWB 2013 HP4 Competition |
|
Appreciate
0
|
03-22-2015, 09:59 PM | #6 |
New Member
0
Rep 12
Posts |
I'll just leave this here...PDF page 43...part number 8053...
http://www.pagidracing.com/fileadmin...-catalogue.pdf |
Appreciate
0
|
03-30-2015, 03:03 AM | #7 |
Lieutenant
85
Rep 425
Posts |
Those values include the backing plate. I only measured the compound material.
Bump for price drop.
__________________
2021 ZR2 Airborne certified
2019 GTS PCCB 5x130 Slick 2016 Agate Grey GT4 PCCB LWB 2013 HP4 Competition |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|