F/S

gmbbs · 06-07-2016, 02:17 PM

BIMMERPOST / Classifieds

Asking Price:

USD 425.00

Or Best Offer

Location:

✓ Will Ship

Item Interest

Selling Ground Control Race Sway bars. Front bar is 1.25" and rear bar is 1.125 inch. Links are nice and tight, no squeaks, no rattles. Adjustable front and rear, grease fittings on bushings. Used for approx. 15K miles.

Ready to ship!

Asking $450 OBO.

Thanks!

mckenna4978 · 06-07-2016, 09:51 PM

Purchased strong strut brace and firewall braces from this seller. I would purchase again. Well packaged, good communication, 2 day fedex shipping. Pleasure to deal with.
mckenna4978

gmbbs · 06-10-2016, 11:09 AM

Friday bump!

Make me an offer, ladies and germs. These work fine on a street car too, don't need to be racing to have a flatter cornering car!

Vanne · 06-10-2016, 11:12 AM

Are these for the Z4m? or Z4? if they are for the M, how do they compare with stock ones?

gmbbs · 06-10-2016, 03:13 PM

They came off my //M, should fit either. They were on the car when I bought it, so sorry but I don't have a reference point for you compared to stock.

mpathic · 06-11-2016, 06:18 AM

Is the front bar hollow? IF yes, then you have a buyer.

gmbbs · 06-11-2016, 09:21 AM

Yes, front and rear are hollow tubular bars. Very light weight.

GuidoK · 06-11-2016, 09:57 AM

Quote:

Originally Posted by gmbbs

They came off my //M, should fit either.

Are you sure they fit a non M?
I think the rear one wont fit a non M.

dfjaws · 06-11-2016, 10:25 AM

The rear suspension is the same E46 style. If anything I'd imagine the front wouldn't fit. A quick call to GC should answer the question though for any prospective buyers.

gmbbs · 06-11-2016, 10:56 AM

OK, I retract my statement that they'd fit a non-M, I assumed they would.

GuidoK · 06-11-2016, 11:24 AM

Quote:

Originally Posted by dfjaws

The rear suspension is the same E46 style. If anything I'd imagine the front wouldn't fit.

No, the rear suspension is the same as e46 m3 style. e46/z4 have a different style arb.

Front fitment wont be a problem I assume, as swapping z4 to z4m or m3 arb's is a very very common mod.

gmbbs · 06-11-2016, 12:12 PM

Sale Pending!

Thanks for the interest!

007MCoupe · 06-11-2016, 06:12 PM

Can't speak for the rear end, but I had the GC front bar and it was noticeably stiffer. GLWS super easy to install too!

inTgr8r · 06-11-2016, 06:16 PM

I have my eyes open for a front only bar.
They don't get any better than these.

For the new owner, I highly recommend front reinforcement plates.
Easy to do and good preventative measure. ( threads here on topic)

Vanne · 06-12-2016, 11:15 AM

Would that be this one Ian?

http://www.zpost.com/forums/showthread.php?t=786695

and is JB Weld to go to epoxy now?

i2ichal2dZ4M · 06-12-2016, 11:48 AM

would one be able to cut steel bar with a grocer accurately or would a machine shop be recommended for the reinforcement plates

inTgr8r · 06-12-2016, 01:24 PM

Quote:

Originally Posted by Vanne

Would that be this one Ian?

http://www.zpost.com/forums/showthread.php?t=786695

and is JB Weld to go to epoxy now?

Yup... JB is fine for this.

inTgr8r · 06-12-2016, 01:29 PM

Quote:

Originally Posted by i2ichal2dZ4M

would one be able to cut steel bar with a grocer accurately or would a machine shop be recommended for the reinforcement plates

Definitely a DIY project.
You can get flat stock in the appropriate width.
Cut to length & shape with a hack saw
Then it's just a matter of drilling the holes.
I would use a minimum of 1/8th ; 1/4 max. whatever you can get easily.

i2ichal2dZ4M · 06-14-2016, 11:37 AM

thanks for the info!!!! I really appreciate it!

mpathic · 06-22-2016, 04:28 PM

Sale was pending, but is it sold? IF not, then I'll take them. Pls reply privately.

Vanne · 06-23-2016, 03:40 AM

Yep its sold, bought and payed for.

inTgr8r · 06-23-2016, 07:21 AM

Quote:

Originally Posted by Vanne

Yep its sold, bought and payed for.

Good stuff!

06-07-2016, 02:17 PM	#1
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	F/S - Ground Control Racing Swy Bars BIMMERPOST / Classifieds Asking Price: USD 425.00 Or Best Offer Location: ✓ Will Ship Item Interest Selling Ground Control Race Sway bars. Front bar is 1.25" and rear bar is 1.125 inch. Links are nice and tight, no squeaks, no rattles. Adjustable front and rear, grease fittings on bushings. Used for approx. 15K miles. Ready to ship! Asking $450 OBO. Thanks!
	Appreciate 0 Tweet Quote

06-07-2016, 09:51 PM	#2
mckenna4978 Private First Class 21 Rep 110 Posts Drives: 07' BMW z4mr-A08 Join Date: Dec 2014 Location: chicago,illinois iTrader: (0)	Purchased strong strut brace and firewall braces from this seller. I would purchase again. Well packaged, good communication, 2 day fedex shipping. Pleasure to deal with. mckenna4978
	Appreciate 0 Quote

06-10-2016, 11:09 AM	#3
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	Friday bump! Make me an offer, ladies and germs. These work fine on a street car too, don't need to be racing to have a flatter cornering car!
	Appreciate 0 Quote

06-10-2016, 11:12 AM	#4
Vanne Down Under!! 1621 Rep 4,294 Posts Drives: 2007 Z4MC Join Date: Mar 2013 Location: Dubai iTrader: (4)	Are these for the Z4m? or Z4? if they are for the M, how do they compare with stock ones? __________________ 2007 EuroSpec Z4///MC - Building/Developing Z4 GT3 Powered by
	Appreciate 0 Quote

06-10-2016, 03:13 PM	#5
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	They came off my //M, should fit either. They were on the car when I bought it, so sorry but I don't have a reference point for you compared to stock.
	Appreciate 0 Quote

06-11-2016, 06:18 AM	#6
mpathic First Lieutenant 35 Rep 310 Posts Drives: Z4 MCoupe,3.0Si R,E61 535xiT Join Date: Oct 2014 Location: California iTrader: (0)	Is the front bar hollow? IF yes, then you have a buyer. __________________ And you may ask yourself, "Where is that large automobile?"
	Appreciate 0 Quote

06-11-2016, 09:21 AM	#7
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	Yes, front and rear are hollow tubular bars. Very light weight.
	Appreciate 0 Quote

06-11-2016, 10:25 AM	#9
dfjaws Lieutenant 57 Rep 535 Posts Drives: E90 M3 / E86 M Coupe Join Date: Sep 2011 Location: Des Moines, IA iTrader: (5)	The rear suspension is the same E46 style. If anything I'd imagine the front wouldn't fit. A quick call to GC should answer the question though for any prospective buyers. __________________
	Appreciate 0 Quote

06-11-2016, 10:56 AM	#10
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	OK, I retract my statement that they'd fit a non-M, I assumed they would.
	Appreciate 0 Quote

06-11-2016, 12:12 PM	#12
gmbbs Private 18 Rep 86 Posts Drives: TBD Join Date: Jun 2011 Location: DFW iTrader: (3)	Sale Pending! Thanks for the interest!
	Appreciate 0 Quote

06-11-2016, 06:12 PM	#13
007MCoupe Lieutenant Colonel 94 Rep 1,546 Posts Drives: '18 Sakhir M3 ZCP Join Date: Jun 2010 Location: ( ///// ) iTrader: (5)	Can't speak for the rear end, but I had the GC front bar and it was noticeably stiffer. GLWS super easy to install too! __________________ Become a ///Member!
	Appreciate 0 Quote

06-11-2016, 06:16 PM	#14
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	I have my eyes open for a front only bar. They don't get any better than these. For the new owner, I highly recommend front reinforcement plates. Easy to do and good preventative measure. ( threads here on topic) __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

06-12-2016, 11:15 AM	#15
Vanne Down Under!! 1621 Rep 4,294 Posts Drives: 2007 Z4MC Join Date: Mar 2013 Location: Dubai iTrader: (4)	Would that be this one Ian? http://www.zpost.com/forums/showthread.php?t=786695 and is JB Weld to go to epoxy now? __________________ 2007 EuroSpec Z4///MC - Building/Developing Z4 GT3 Powered by
	Appreciate 0 Quote

06-12-2016, 11:48 AM	#16
i2ichal2dZ4M Lieutenant 63 Rep 516 Posts Drives: 2007 BSM Z4MC Join Date: Mar 2011 Location: Los Angeles, California iTrader: (1)	would one be able to cut steel bar with a grocer accurately or would a machine shop be recommended for the reinforcement plates __________________ 2007 BSM Z4M Coupe - 18" VOLK TE37 - 18" Apex ARC-8 - GC Track/Street
	Appreciate 0 Quote

06-14-2016, 11:37 AM	#19
i2ichal2dZ4M Lieutenant 63 Rep 516 Posts Drives: 2007 BSM Z4MC Join Date: Mar 2011 Location: Los Angeles, California iTrader: (1)	thanks for the info!!!! I really appreciate it! __________________ 2007 BSM Z4M Coupe - 18" VOLK TE37 - 18" Apex ARC-8 - GC Track/Street
	Appreciate 0 Quote

06-22-2016, 04:28 PM	#20
mpathic First Lieutenant 35 Rep 310 Posts Drives: Z4 MCoupe,3.0Si R,E61 535xiT Join Date: Oct 2014 Location: California iTrader: (0)	Sale was pending, but is it sold? IF not, then I'll take them. Pls reply privately. __________________ And you may ask yourself, "Where is that large automobile?"
	Appreciate 0 Quote

06-23-2016, 03:40 AM	#21
Vanne Down Under!! 1621 Rep 4,294 Posts Drives: 2007 Z4MC Join Date: Mar 2013 Location: Dubai iTrader: (4)	Yep its sold, bought and payed for.
	Appreciate 0 Quote