04-01-2017, 05:41 PM | #1 |
Banned
88
Rep 352
Posts
Drives: 2002 imola/cinnamon e46 M3
Join Date: Jul 2015
Location: wellesely ma
|
Hello everyone, I am helping sell these wheels for a friend of mine. He bought them from Stance about a year ago and they only have about 8k miles on them. When i say these wheels are in perfect condition it looks like they just came out of the box. The finish is absolutely exquisite and they were custom painted from Stance. They have also been coated with ceramic sealant so brake dust does not stick to them easily. These wheels were on a Corvette C7 Z06 but I believe they would fit an F10 M5 or F80 M3/M4. Thank you for looking and he is opened to offers! Specs: FRONT: 19x10 +30 offset REAR: 20x12 +46 offset Bolt pattern: 5x120 Last edited by austinhuffzz; 04-02-2017 at 04:59 PM.. |
04-01-2017, 07:23 PM | #3 |
Banned
88
Rep 352
Posts
Drives: 2002 imola/cinnamon e46 M3
Join Date: Jul 2015
Location: wellesely ma
|
Center bore is 70.3
|
Appreciate
0
|
04-07-2017, 12:43 AM | #5 |
Licensed Drug Dealer
742
Rep 2,269
Posts |
The only problem with these isn't the offsets. The offsets actually might work. The problem is the hub bore. You'd have to bore out the center to a BMW 72.6.
|
Appreciate
0
|
04-07-2017, 03:22 AM | #6 |
First Lieutenant
49
Rep 317
Posts |
That rear wheel width will only "work" if you have a custom wide body rear or aftermarket struts. That offset will require some type of spacer, unless you want to run the risk of hitting the stock strut. If you bore out the center yes, it will bolt on, but just because it bolts up doesn't mean it "fits"
Unless JDM trend negative camber, ultra-stretched tires, and "stance" is what you're going for on your BMW. Last edited by BlackWidow; 04-07-2017 at 03:30 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|