Zito ZF03 20" on 2018 F80

[5low5]

Just mounted these Zitos I bought from AR Motorwerkz here on the forum

Wanted to share pics and my experience with Ron from AR Motorwerkz.

First off, the wheels look awesome on the F80. Perfectly flush with the fender. I had my mind made up on buying some spacers to get flush fitment with these, but no need. They make the rears look even more aggressive than the 666Ms. Also the concavity on the rears is amazing.

Also can't say enough good things about Ron. I was back and forth for a bit before I pulled the trigger on these. He was quick to answer every obsessive question I had about these wheels. We also had a hiccup in the process (which was not his fault at all) that he quickly resolved. Will definitely be buying from him again in the future without hesitation.

Sorry the pictures are not great. The car is dirty and it was dark out, I will post better pictures if there's any interest.

20x10 ET25
20x11 ET35

[NickyC]

Hard to see (lol), but sort of look like the HRE flows I put on my car I think. Please post better pictures!

Those rears look *really* stretched though, is that the look you were going for? What sized rear tire did you put on those 11s?

[5low5]

Yeah terrible pics lol. Will post more tomorrow after she's washed.

And yes they are more stretched than I'd like. They're 285s in the back. Thinking of upsizing to 295. What do you have on the rear?

[GomFam23]

+1 for Ron .... good guy

[jninja]

Would've been cool to actually see a picture of the wheels....in this wheel post

[Lifestyler]

Looks good . Waiting on better Pics

[LOW4LYF]

My old Zito Setup 20x10 & 20x11



Now BBS LM 20x10 & 20x12

[5low5]

Originally Posted by LOW4LYF

My old Zito Setup 20x10 & 20x11



Now BBS LM 20x10 & 20x12

Both setups look great!

What tire sizes on the rears? I'm about to pull the trigger on 295/30 but wondering if I should go 305/30 to get rid of all the stretch

[LOW4LYF]

On the ZTIO: 265/30 285/30
On the BBS: 255/35 305/30

[5low5]

Hm, why do my 285s look so much more stretched than yours?

[LOW4LYF]

Looks the same to me... but may the "hump" inside the wheel is different between ZF03 and ZF05?

But again... looks same to me.

[5low5]

Maybe it's in my head.

More pics of the wheel. Will add more after she gets a wash today

[cwazy1]

Also- PSS are narrower and less full sidewall than ps4s. I'd go 295 ps4s or 305 pss. (assuming you won't rub on 305s)

[LOW4LYF]

OEM PSS

[5low5]

Got the 295/30 out on the back. Much better

[NickyC]

Nice, yep I'm running 295s on my 20x11 HRE flows. Those looks great!

[5low5]

NickyC, do you rub at all? I just had 3 passengers in my car and rub in the back on bumps...

[ruley74]

Originally Posted by 5low5

I just had 3 passengers in my car and rub in the back on bumps...

Are you now rubbing the rear on the outside with the 295?

[5low5]

Yeah I assume that's where it's rubbing. That's where it's closest to the fender.

Not sure what to do

[ruley74]

Originally Posted by 5low5

Yeah I assume that's where it's rubbing. That's where it's closest to the fender.

Not sure what to do

Be curious how much meat is on the hub mating surface, might be worth contacting the manufacturer to see if you can safely machine off a couple of mm to bring the offset to around 37mm. You've helped me with the feedback of rubbing regards thinking of another set of rims and offsets.

[NickyC]

Originally Posted by 5low5

NickyC, do you rub at all? I just had 3 passengers in my car and rub in the back on bumps...

No sir! I'm even on H&R lowering springs and never had a single rub ever.

However, I've never had three people in the backseat either!

Here are a couple pics of my car w/flows and a drop. 265/30/20 front and 295/30/20 rear.

[LOW4LYF]

Fitment isn't the same on F80 & F82.

F82 has 2-3mm more clearance.