Coding B&O DSP with HK system

[anacondatp]

I have been searching everywhere for a good HK setting and have tried a bunch of settings shared by folks and was not impressed with any. I happened to stop on a post in F30 and F80 forum and they code B&O DSP to their HK system so I tried and I think the B&O DSP definitely has some good tone to it. I am current using these settings in the pic and think it is alright so far so just want to share and see if anyone on F15 forum has tried this. I also set the B&O setting to "expanded"

Coding: (can be done using Bimmercode)
HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = volle_insz

[cheungyithin]

So this is like to add a "B&O" option to a HK system?

[anacondatp]

Originally Posted by cheungyithin

So this is like to add a "B&O" option to a HK system?

yes and using b&o dsp settings and eq. the eq looks the same but b&o eq sounds different than hk

[Jason73]

Can this be coded and used for the stock system?

[Russmov]

Originally Posted by anacondatp

I have been searching everywhere for a good HK setting and have tried a bunch of settings shared by folks and was not impressed with any. I happened to stop on a post in F30 and F80 forum and they code B&O DSP to their HK system so I tried and I think the B&O DSP definitely has some good tone to it. I am current using these settings in the pic and think it is alright so far so just want to share and see if anyone on F15 forum has tried this. I also set the B&O setting to "expanded"

Coding: (can be done using Bimmercode)
HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = volle_insz

I might give this try. I haven't been able to get a setting that I like.

[anacondatp]

Originally Posted by Jason73

Can this be coded and used for the stock system?

i think so. i saw 3 options for audio in there so could be stock, hk, and b&o

[MK2018]

I've tried and it's actually works, it's little bit better sounds now with extra settings

[artem123]

Originally Posted by MK2018

I've tried and it's actually works, it's little bit better sounds now with extra settings

Coding it to standard hi fi sound? If so, how?

[MK2018]

Originally Posted by artem123

Coding it to standard hi fi sound? If so, how?

What do you mean ?

[W37V]

Originally Posted by artem123

Coding it to standard hi fi sound? If so, how?

Probably the same way it is for any other system:
HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = volle_insz


On separate note: I did this coding yesterday. It's not total revelation, but it does sound slightly better.

[artem123]

Originally Posted by W37V

Probably the same way it is for any other system:
HU_NBT or HU_NBT2 > HMI 3000 > HIGH_END_AUDIO_MENUE = volle_insz


On separate note: I did this coding yesterday. It's not total revelation, but it does sound slightly better.

Yes, i coded it just like that last night, and now i have B&O in tone menu, however i strongly doubt it made any difference. I have a Bavsond stage one update.