07-12-2023, 05:56 PM | #1 |
Registered
1
Rep 4
Posts |
Clunk when backup after going forward and braking
Notice this consistantly when coming home. I pull past my drive and stop, then backup into the driveway. When reversing and then applying brake pressure, I then hear a clunk. I can get it to repeat just about every time if I first drive foward at a decent speed and brake.
So my thought is a loose brake caliper. But I double checked them all and they are all tight. Any other ideas? I did recently replace tie rods, brakes, rotors, front suspension, rear shocks. |
07-12-2023, 07:37 PM | #2 |
Enlisted Member
17
Rep 41
Posts |
Did you put wrenches on the bolts to verify tightness?
I had a loosening front lower inner control arm (aka lower wishbone per TIS) bushing. It was aftermarket and since removed. But it was causing a clunk as you describe. The nut should be torqued to 165 Nm for reference (tightened in normal position) |
Appreciate
0
|
07-13-2023, 12:25 PM | #3 | |
Registered
1
Rep 4
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|