Iss Forged 3-piece Wheels For 1-series

4GETIT · 11-16-2011, 07:36 PM

I have a set of custom made ISS Forged Spider 3-Piece wheels. These were ordered from Vivid Racing and custom made and colored by ISS Forged wheels for my 2011 BMW 135I. The size are staggered fit with front 18x8 and rear 18x9. I originally removed the stock run flat tires and used them on these wheels. They are colored flat black centers, gloss black lip, and 1/8 in blood red pinstriped with blood red rivets. I originally paid $4700.00 plus shipping for them and will let them go cheap line 2k, they were on my car.

I just traded in my 135I BMW to dealer and in order for BMW to certify car for resale, they must have the stock BMW OME wheels. So I removed these and gave them the stock wheels, even thou they admitted the car was SIC/BAD ASS Looking.

Wheels were originally weighed by Vivid Racing before installed on car and the ISS wheels weighed was 22 lbs compared to stock BMW M wheel at 27.5 lbs. This is the only reason I am getting rid of these wheels, they are not bent, warped or and defects at all in the wheel performance and are true 3-piece wheels, not fake ones with fake rivets.

My loss is your definite gain and half the price with no tax. I have the original boxes they were shipped in from ISS.

Note there are some small paint chips on one wheels but not that noticeable and if it bothers you they can be touched up.
I did not bother me and I am picky!!!

THAT'S THE GREAT THING ABOUT 3-PIECE WHEELS THEY CAN BE EASILY UNBOLTED AND ONLY THAT PIECE CAN BE DONE.

I also have the original receipt!

Click link to see photos of wheels

http://s346.photobucket.com/albums/p.../BMW%20WHEELS/

RaihaX · 11-16-2011, 07:57 PM

GLWS mate too ricey for my liking with the reds!

M3Newbie88 · 11-16-2011, 08:02 PM

Looks nice (the black parts).. would sell alot quicker if the bolts and lip are not red.. never liked the time attack look.

4GETIT · 11-16-2011, 08:05 PM

Look up VIVID Racing and look at their 135 project car they built. it was badassssssss. I just copied their car, My car was their first 2011 with the new engine. They customize and design and manufacture parts for cars, and my car was prototype for them with the new engine. You have to see the wheels on the car. Their wheels just had the red outer lip, I had them make the rivets red on my wheels to make it a little different. Its either u like it or u don't, that's all. My wife could not stand them and I told her to stay in her 128 then if u r gonna complain

RaihaX · 11-16-2011, 08:07 PM

Quote:

Originally Posted by 4GETIT

Look up VIVID Racing and look at their 135 project car they built. it was badassssssss. I just copied their car, My car was their first 2011 with the new engine. They customize and design and manufacture parts for cars and my car was prototype for them with the new engine. You have to see the wheels on the car. Their wheels just had the red outer lip, I had then make the rivets rivets on my wheel to make it a little different. Its either u like it or u don't, that's all. My wife could not stand them and I told her to stay in her 128 then if u r gonna complain

is 128i code word for kitchen for you Americans ?

4GETIT · 11-16-2011, 09:01 PM

Okay if u like them them great, if u don't then u don't. I do not need to here from u if u want to tell me they look like this or they look like that. I am just trying to sell the wheels that I have after trading in the car. Simple as that. THX Again for looking

GT1281 · 11-19-2011, 05:57 PM

Quote:

Originally Posted by 4GETIT

Okay if u like them them great, if u don't then u don't. I do not need to here from u if u want to tell me they look like this or they look like that. I am just trying to sell the wheels that I have after trading in the car. Simple as that. THX Again for looking

I agree with you. If it weren't for the red I might be interested. I just dont have the time and don't want to waste the money to take wheels apart to repaint them. If you decide to do something regarding the color if they don't sell let me know.

4GETIT · 11-21-2011, 10:14 PM

Okay ladies and gentlemen, I called ISS Wheels today and the cost for new bolts in either chrome or black are $75.00 a wheel plus shipping. They have to be torqued at 23 lbs

So hopefully that will give u some more options. The red bolts are painted red not powder coated like the rest of wheel.

I still believe that the additional $300.00 plus shipping for all new bolts is still a bargain for these wheels at a cost of 5K for what I paid for the wheels.

Just check with similar style by HRE Wheels.

The first one gets them.

11-16-2011, 07:36 PM	#1
4GETIT BLK N BLK, ISS 3 wheels, JuiceBox, Agency Power 6 Rep 27 Posts Drives: 2011 135I N55 BLK N BLK Join Date: Oct 2010 Location: Phoenix, AZ iTrader: (0)	Iss Forged 3-piece Wheels For 1-series I have a set of custom made ISS Forged Spider 3-Piece wheels. These were ordered from Vivid Racing and custom made and colored by ISS Forged wheels for my 2011 BMW 135I. The size are staggered fit with front 18x8 and rear 18x9. I originally removed the stock run flat tires and used them on these wheels. They are colored flat black centers, gloss black lip, and 1/8 in blood red pinstriped with blood red rivets. I originally paid $4700.00 plus shipping for them and will let them go cheap line 2k, they were on my car. I just traded in my 135I BMW to dealer and in order for BMW to certify car for resale, they must have the stock BMW OME wheels. So I removed these and gave them the stock wheels, even thou they admitted the car was SIC/BAD ASS Looking. Wheels were originally weighed by Vivid Racing before installed on car and the ISS wheels weighed was 22 lbs compared to stock BMW M wheel at 27.5 lbs. This is the only reason I am getting rid of these wheels, they are not bent, warped or and defects at all in the wheel performance and are true 3-piece wheels, not fake ones with fake rivets. My loss is your definite gain and half the price with no tax. I have the original boxes they were shipped in from ISS. Note there are some small paint chips on one wheels but not that noticeable and if it bothers you they can be touched up. I did not bother me and I am picky!!! THAT'S THE GREAT THING ABOUT 3-PIECE WHEELS THEY CAN BE EASILY UNBOLTED AND ONLY THAT PIECE CAN BE DONE. I also have the original receipt! Click link to see photos of wheels http://s346.photobucket.com/albums/p.../BMW%20WHEELS/ __________________ 2011 135i N55 DCT: Agency Power Downpipe, MidPipe, Axle Back, Burger Motorsports JB3, AP Carbon Fiber Splitters and Diffuser, H&R Springs. Past rides: MB CL55 AMG, BMW M3, Porsche 911TURBO, MB CLK63 AMG-BLACK SERIES, 2002 325I, 2003 X5, 2011 BMW 128I, 2010 X3, AND LAST BUT NOT LEAST THE 135I. WHO SAYS GETTING BORED DOES NOT HAVE ITS ADVANTAGES, NO HATTERS PLZ Last edited by 4GETIT; 11-16-2011 at 08:57 PM..
	Appreciate 0 Tweet Quote

11-16-2011, 07:57 PM	#2
RaihaX Major General 156 Rep 4,995 Posts Drives: 08' 135i Join Date: Aug 2008 Location: Australia, Perth iTrader: (2)	GLWS mate too ricey for my liking with the reds!
	Appreciate 0 Quote

11-16-2011, 08:02 PM	#3
M3Newbie88 Brigadier General 138 Rep 4,053 Posts Drives: E92 M3 Join Date: Jun 2008 Location: Canada iTrader: (5)	Looks nice (the black parts).. would sell alot quicker if the bolts and lip are not red.. never liked the time attack look.
	Appreciate 0 Quote

11-16-2011, 08:05 PM	#4
4GETIT BLK N BLK, ISS 3 wheels, JuiceBox, Agency Power 6 Rep 27 Posts Drives: 2011 135I N55 BLK N BLK Join Date: Oct 2010 Location: Phoenix, AZ iTrader: (0)	Look up VIVID Racing and look at their 135 project car they built. it was badassssssss. I just copied their car, My car was their first 2011 with the new engine. They customize and design and manufacture parts for cars, and my car was prototype for them with the new engine. You have to see the wheels on the car. Their wheels just had the red outer lip, I had them make the rivets red on my wheels to make it a little different. Its either u like it or u don't, that's all. My wife could not stand them and I told her to stay in her 128 then if u r gonna complain __________________ 2011 135i N55 DCT: Agency Power Downpipe, MidPipe, Axle Back, Burger Motorsports JB3, AP Carbon Fiber Splitters and Diffuser, H&R Springs. Past rides: MB CL55 AMG, BMW M3, Porsche 911TURBO, MB CLK63 AMG-BLACK SERIES, 2002 325I, 2003 X5, 2011 BMW 128I, 2010 X3, AND LAST BUT NOT LEAST THE 135I. WHO SAYS GETTING BORED DOES NOT HAVE ITS ADVANTAGES, NO HATTERS PLZ
	Appreciate 0 Quote

11-16-2011, 09:01 PM	#6
4GETIT BLK N BLK, ISS 3 wheels, JuiceBox, Agency Power 6 Rep 27 Posts Drives: 2011 135I N55 BLK N BLK Join Date: Oct 2010 Location: Phoenix, AZ iTrader: (0)	Okay if u like them them great, if u don't then u don't. I do not need to here from u if u want to tell me they look like this or they look like that. I am just trying to sell the wheels that I have after trading in the car. Simple as that. THX Again for looking __________________ 2011 135i N55 DCT: Agency Power Downpipe, MidPipe, Axle Back, Burger Motorsports JB3, AP Carbon Fiber Splitters and Diffuser, H&R Springs. Past rides: MB CL55 AMG, BMW M3, Porsche 911TURBO, MB CLK63 AMG-BLACK SERIES, 2002 325I, 2003 X5, 2011 BMW 128I, 2010 X3, AND LAST BUT NOT LEAST THE 135I. WHO SAYS GETTING BORED DOES NOT HAVE ITS ADVANTAGES, NO HATTERS PLZ
	Appreciate 0 Quote

11-21-2011, 10:14 PM	#8
4GETIT BLK N BLK, ISS 3 wheels, JuiceBox, Agency Power 6 Rep 27 Posts Drives: 2011 135I N55 BLK N BLK Join Date: Oct 2010 Location: Phoenix, AZ iTrader: (0)	Okay ladies and gentlemen, I called ISS Wheels today and the cost for new bolts in either chrome or black are $75.00 a wheel plus shipping. They have to be torqued at 23 lbs So hopefully that will give u some more options. The red bolts are painted red not powder coated like the rest of wheel. I still believe that the additional $300.00 plus shipping for all new bolts is still a bargain for these wheels at a cost of 5K for what I paid for the wheels. Just check with similar style by HRE Wheels. The first one gets them. __________________ 2011 135i N55 DCT: Agency Power Downpipe, MidPipe, Axle Back, Burger Motorsports JB3, AP Carbon Fiber Splitters and Diffuser, H&R Springs. Past rides: MB CL55 AMG, BMW M3, Porsche 911TURBO, MB CLK63 AMG-BLACK SERIES, 2002 325I, 2003 X5, 2011 BMW 128I, 2010 X3, AND LAST BUT NOT LEAST THE 135I. WHO SAYS GETTING BORED DOES NOT HAVE ITS ADVANTAGES, NO HATTERS PLZ
	Appreciate 0 Quote